File	Doc	Category	Size	Date	Package
ImageOutputStream.java	API Doc	Java SE 6 API	26152	Tue Jun 10 00:26:10 BST 2008	javax.imageio.stream

ImageOutputStream

Fields Summary

Constructors Summary

Methods Summary
public void	flushBefore(long pos) Flushes all data prior to the given position to the underlying destination, such as an OutputStream or File. Attempting to seek to the flushed portion of the stream will result in an IndexOutOfBoundsException. param pos a long containing the length of the stream prefix that may be flushed to the destination. exception IndexOutOfBoundsException if pos lies in the flushed portion of the stream or past the current stream position. exception IOException if an I/O error occurs.
public void	write(int b) Writes a single byte to the stream at the current position. The 24 high-order bits of b are ignored. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. Implementers can use the {@link ImageOutputStreamImpl#flushBits flushBits} method of {@link ImageOutputStreamImpl ImageOutputStreamImpl} to guarantee this. param b an int whose lower 8 bits are to be written. exception IOException if an I/O error occurs.
public void	write(byte[] b) Writes a sequence of bytes to the stream at the current position. If b.length is 0, nothing is written. The byte b[0] is written first, then the byte b[1], and so on. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param b an array of bytes to be written. exception NullPointerException if b is null. exception IOException if an I/O error occurs.
public void	write(byte[] b, int off, int len) Writes a sequence of bytes to the stream at the current position. If len is 0, nothing is written. The byte b[off] is written first, then the byte b[off + 1], and so on. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. Implementers can use the {@link ImageOutputStreamImpl#flushBits flushBits} method of {@link ImageOutputStreamImpl ImageOutputStreamImpl} to guarantee this. param b an array of bytes to be written. param off the start offset in the data. param len the number of bytes to write. exception IndexOutOfBoundsException if off is negative, len is negative, or off + len is greater than b.length. exception NullPointerException if b is null. exception IOException if an I/O error occurs.
public void	writeBit(int bit) Writes a single bit, given by the least significant bit of the argument, to the stream at the current bit offset within the current byte position. The upper 31 bits of the argument are ignored. The given bit replaces the previous bit at that position. The bit offset is advanced by one and reduced modulo 8. If any bits of a particular byte have never been set at the time the byte is flushed to the destination, those bits will be set to 0 automatically. param bit an int whose least significant bit is to be written to the stream. exception IOException if an I/O error occurs.
public void	writeBits(long bits, int numBits) Writes a sequence of bits, given by the numBits least significant bits of the bits argument in left-to-right order, to the stream at the current bit offset within the current byte position. The upper 64 - numBits bits of the argument are ignored. The bit offset is advanced by numBits and reduced modulo 8. Note that a bit offset of 0 always indicates the most-significant bit of the byte, and bytes of bits are written out in sequence as they are encountered. Thus bit writes are always effectively in network byte order. The actual stream byte order setting is ignored. Bit data may be accumulated in memory indefinitely, until flushBefore is called. At that time, all bit data prior to the flushed position will be written. If any bits of a particular byte have never been set at the time the byte is flushed to the destination, those bits will be set to 0 automatically. param bits a long containing the bits to be written, starting with the bit in position numBits - 1 down to the least significant bit. param numBits an int between 0 and 64, inclusive. exception IllegalArgumentException if numBits is not between 0 and 64, inclusive. exception IOException if an I/O error occurs.
public void	writeBoolean(boolean v) Writes a boolean value to the stream. If v is true, the value (byte)1 is written; if v is false, the value (byte)0 is written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param v the boolean to be written. exception IOException if an I/O error occurs.
public void	writeByte(int v) Writes the 8 low-order bits of v to the stream. The 24 high-order bits of v are ignored. (This means that writeByte does exactly the same thing as write for an integer argument.) If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param v an int containing the byte value to be written. exception IOException if an I/O error occurs.
public void	writeBytes(java.lang.String s) Writes a string to the output stream. For every character in the string s, taken in order, one byte is written to the output stream. If s is null, a NullPointerException is thrown. If s.length is zero, then no bytes are written. Otherwise, the character s[0] is written first, then s[1], and so on; the last character written is s[s.length-1]. For each character, one byte is written, the low-order byte, in exactly the manner of the writeByte method. The high-order eight bits of each character in the string are ignored. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param s a String containing the value to be written. exception NullPointerException if s is null. exception IOException if an I/O error occurs.
public void	writeChar(int v) This method is a synonym for {@link #writeShort writeShort}. param v an int containing the char (unsigned short) value to be written. exception IOException if an I/O error occurs. see #writeShort(int)
public void	writeChars(java.lang.String s) Writes a string to the output stream. For every character in the string s, taken in order, two bytes are written to the output stream, ordered according to the current byte order setting. If network byte order is being used, the high-order byte is written first; the order is reversed otherwise. If s is null, a NullPointerException is thrown. If s.length is zero, then no bytes are written. Otherwise, the character s[0] is written first, then s[1], and so on; the last character written is s[s.length-1]. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param s a String containing the value to be written. exception NullPointerException if s is null. exception IOException if an I/O error occurs.
public void	writeChars(char[] c, int off, int len) Writes a sequence of chars to the stream at the current position. If len is 0, nothing is written. The char c[off] is written first, then the char c[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param c an array of chars to be written. param off the start offset in the data. param len the number of chars to write. exception IndexOutOfBoundsException if off is negative, len is negative, or off + len is greater than c.length. exception NullPointerException if c is null. exception IOException if an I/O error occurs.
public void	writeDouble(double v) Writes a double value, which is comprised of four bytes, to the output stream. It does this as if it first converts this double value to an long in exactly the manner of the Double.doubleToLongBits method and then writes the long value in exactly the manner of the writeLong method. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param v a double containing the value to be written. exception IOException if an I/O error occurs.
public void	writeDoubles(double[] d, int off, int len) Writes a sequence of doubles to the stream at the current position. If len is 0, nothing is written. The double d[off] is written first, then the double d[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param d an array of doubless to be written. param off the start offset in the data. param len the number of doubles to write. exception IndexOutOfBoundsException if off is negative, len is negative, or off + len is greater than d.length. exception NullPointerException if d is null. exception IOException if an I/O error occurs.
public void	writeFloat(float v) Writes a float value, which is comprised of four bytes, to the output stream. It does this as if it first converts this float value to an int in exactly the manner of the Float.floatToIntBits method and then writes the int value in exactly the manner of the writeInt method. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param v a float containing the value to be written. exception IOException if an I/O error occurs.
public void	writeFloats(float[] f, int off, int len) Writes a sequence of floats to the stream at the current position. If len is 0, nothing is written. The float f[off] is written first, then the float f[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param f an array of floats to be written. param off the start offset in the data. param len the number of floats to write. exception IndexOutOfBoundsException if off is negative, len is negative, or off + len is greater than f.length. exception NullPointerException if f is null. exception IOException if an I/O error occurs.
public void	writeInt(int v) Writes the 32 bits of v to the stream. If the stream uses network byte order, the bytes written, in order, will be: (byte)((v >> 24) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 8) & 0xff) (byte)(v & 0xff) Otheriwse, the bytes written will be: (byte)(v & 0xff) (byte)((v >> 8) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 24) & 0xff) If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param v an int containing the value to be written. exception IOException if an I/O error occurs.
public void	writeInts(int[] i, int off, int len) Writes a sequence of ints to the stream at the current position. If len is 0, nothing is written. The int i[off] is written first, then the int i[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param i an array of ints to be written. param off the start offset in the data. param len the number of ints to write. exception IndexOutOfBoundsException if off is negative, len is negative, or off + len is greater than i.length. exception NullPointerException if i is null. exception IOException if an I/O error occurs.
public void	writeLong(long v) Writes the 64 bits of v to the stream. If the stream uses network byte order, the bytes written, in order, will be: (byte)((v >> 56) & 0xff) (byte)((v >> 48) & 0xff) (byte)((v >> 40) & 0xff) (byte)((v >> 32) & 0xff) (byte)((v >> 24) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 8) & 0xff) (byte)(v & 0xff) Otherwise, the bytes written will be: (byte)(v & 0xff) (byte)((v >> 8) & 0xff) (byte)((v >> 16) & 0xff) (byte)((v >> 24) & 0xff) (byte)((v >> 32) & 0xff) (byte)((v >> 40) & 0xff) (byte)((v >> 48) & 0xff) (byte)((v >> 56) & 0xff) If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param v a long containing the value to be written. exception IOException if an I/O error occurs.
public void	writeLongs(long[] l, int off, int len) Writes a sequence of longs to the stream at the current position. If len is 0, nothing is written. The long l[off] is written first, then the long l[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param l an array of longs to be written. param off the start offset in the data. param len the number of longs to write. exception IndexOutOfBoundsException if off is negative, len is negative, or off + len is greater than l.length. exception NullPointerException if l is null. exception IOException if an I/O error occurs.
public void	writeShort(int v) Writes the 16 low-order bits of v to the stream. The 16 high-order bits of v are ignored. If the stream uses network byte order, the bytes written, in order, will be: (byte)((v >> 8) & 0xff) (byte)(v & 0xff) Otherwise, the bytes written will be: (byte)(v & 0xff) (byte)((v >> 8) & 0xff) If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param v an int containing the short value to be written. exception IOException if an I/O error occurs.
public void	writeShorts(short[] s, int off, int len) Writes a sequence of shorts to the stream at the current position. If len is 0, nothing is written. The short s[off] is written first, then the short s[off + 1], and so on. The byte order of the stream is used to determine the order in which the individual bytes are written. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. param s an array of shorts to be written. param off the start offset in the data. param len the number of shorts to write. exception IndexOutOfBoundsException if off is negative, len is negative, or off + len is greater than s.length. exception NullPointerException if s is null. exception IOException if an I/O error occurs.
public void	writeUTF(java.lang.String s) Writes two bytes of length information to the output stream in network byte order, followed by the modified UTF-8 representation of every character in the string s. If s is null, a NullPointerException is thrown. Each character in the string s is converted to a group of one, two, or three bytes, depending on the value of the character. If a character c is in the range \u0001 through \u007f, it is represented by one byte: (byte)c If a character c is \u0000 or is in the range \u0080 through \u07ff, then it is represented by two bytes, to be written in the order shown: (byte)(0xc0 | (0x1f & (c >> 6))) (byte)(0x80 | (0x3f & c)) If a character c is in the range \u0800 through uffff, then it is represented by three bytes, to be written in the order shown: (byte)(0xe0 | (0x0f & (c >> 12))) (byte)(0x80 | (0x3f & (c >> 6))) (byte)(0x80 | (0x3f & c)) First, the total number of bytes needed to represent all the characters of s is calculated. If this number is larger than 65535, then a UTFDataFormatException is thrown. Otherwise, this length is written to the output stream in exactly the manner of the writeShort method; after this, the one-, two-, or three-byte representation of each character in the string s is written. The current byte order setting is ignored. If the bit offset within the stream is non-zero, the remainder of the current byte is padded with 0s and written out first. The bit offset will be 0 after the write. Note: This method should not be used in the implementation of image formats that use standard UTF-8, because the modified UTF-8 used here is incompatible with standard UTF-8. param s a String containing the value to be written. exception NullPointerException if s is null. exception UTFDataFormatException if the modified UTF-8 representation of s requires more than 65536 bytes. exception IOException if an I/O error occurs.