/*
* Copyright (C) 2007 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.opengl;
import javax.microedition.khronos.opengles.GL10;
/**
* A set of GL utilities inspired by the OpenGL Utility Toolkit.
*
*/
public class GLU {
/**
* Return an error string from a GL or GLU error code.
*
* @param error - a GL or GLU error code.
* @return the error string for the input error code, or NULL if the input
* was not a valid GL or GLU error code.
*/
public static String gluErrorString(int error) {
switch (error) {
case GL10.GL_NO_ERROR:
return "no error";
case GL10.GL_INVALID_ENUM:
return "invalid enum";
case GL10.GL_INVALID_VALUE:
return "invalid value";
case GL10.GL_INVALID_OPERATION:
return "invalid operation";
case GL10.GL_STACK_OVERFLOW:
return "stack overflow";
case GL10.GL_STACK_UNDERFLOW:
return "stack underflow";
case GL10.GL_OUT_OF_MEMORY:
return "out of memory";
default:
return null;
}
}
/**
* Define a viewing transformation in terms of an eye point, a center of
* view, and an up vector.
*
* @param gl a GL10 interface
* @param eyeX eye point X
* @param eyeY eye point Y
* @param eyeZ eye point Z
* @param centerX center of view X
* @param centerY center of view Y
* @param centerZ center of view Z
* @param upX up vector X
* @param upY up vector Y
* @param upZ up vector Z
*/
public static void gluLookAt(GL10 gl, float eyeX, float eyeY, float eyeZ,
float centerX, float centerY, float centerZ, float upX, float upY,
float upZ) {
float[] scratch = sScratch;
synchronized(scratch) {
Matrix.setLookAtM(scratch, 0, eyeX, eyeY, eyeZ, centerX, centerY, centerZ,
upX, upY, upZ);
gl.glMultMatrixf(scratch, 0);
}
}
/**
* Set up a 2D orthographic projection matrix
*
* @param gl
* @param left
* @param right
* @param bottom
* @param top
*/
public static void gluOrtho2D(GL10 gl, float left, float right,
float bottom, float top) {
gl.glOrthof(left, right, bottom, top, -1.0f, 1.0f);
}
/**
* Set up a perspective projection matrix
*
* @param gl a GL10 interface
* @param fovy specifies the field of view angle, in degrees, in the Y
* direction.
* @param aspect specifies the aspect ration that determins the field of
* view in the x direction. The aspect ratio is the ratio of x
* (width) to y (height).
* @param zNear specifies the distance from the viewer to the near clipping
* plane (always positive).
* @param zFar specifies the distance from the viewer to the far clipping
* plane (always positive).
*/
public static void gluPerspective(GL10 gl, float fovy, float aspect,
float zNear, float zFar) {
float top = zNear * (float) Math.tan(fovy * (Math.PI / 360.0));
float bottom = -top;
float left = bottom * aspect;
float right = top * aspect;
gl.glFrustumf(left, right, bottom, top, zNear, zFar);
}
/**
* Map object coordinates into window coordinates. gluProject transforms the
* specified object coordinates into window coordinates using model, proj,
* and view. The result is stored in win.
* <p>
* Note that you can use the OES_matrix_get extension, if present, to get
* the current modelView and projection matrices.
*
* @param objX object coordinates X
* @param objY object coordinates Y
* @param objZ object coordinates Z
* @param model the current modelview matrix
* @param modelOffset the offset into the model array where the modelview
* maxtrix data starts.
* @param project the current projection matrix
* @param projectOffset the offset into the project array where the project
* matrix data starts.
* @param view the current view, {x, y, width, height}
* @param viewOffset the offset into the view array where the view vector
* data starts.
* @param win the output vector {winX, winY, winZ}, that returns the
* computed window coordinates.
* @param winOffset the offset into the win array where the win vector data
* starts.
* @return A return value of GL_TRUE indicates success, a return value of
* GL_FALSE indicates failure.
*/
public static int gluProject(float objX, float objY, float objZ,
float[] model, int modelOffset, float[] project, int projectOffset,
int[] view, int viewOffset, float[] win, int winOffset) {
float[] scratch = sScratch;
synchronized(scratch) {
final int M_OFFSET = 0; // 0..15
final int V_OFFSET = 16; // 16..19
final int V2_OFFSET = 20; // 20..23
Matrix.multiplyMM(scratch, M_OFFSET, project, projectOffset,
model, modelOffset);
scratch[V_OFFSET + 0] = objX;
scratch[V_OFFSET + 1] = objY;
scratch[V_OFFSET + 2] = objZ;
scratch[V_OFFSET + 3] = 1.0f;
Matrix.multiplyMV(scratch, V2_OFFSET,
scratch, M_OFFSET, scratch, V_OFFSET);
float w = scratch[V2_OFFSET + 3];
if (w == 0.0f) {
return GL10.GL_FALSE;
}
float rw = 1.0f / w;
win[winOffset] =
view[viewOffset] + view[viewOffset + 2]
* (scratch[V2_OFFSET + 0] * rw + 1.0f)
* 0.5f;
win[winOffset + 1] =
view[viewOffset + 1] + view[viewOffset + 3]
* (scratch[V2_OFFSET + 1] * rw + 1.0f) * 0.5f;
win[winOffset + 2] = (scratch[V2_OFFSET + 2] * rw + 1.0f) * 0.5f;
}
return GL10.GL_TRUE;
}
/**
* Map window coordinates to object coordinates. gluUnProject maps the
* specified window coordinates into object coordinates using model, proj,
* and view. The result is stored in obj.
* <p>
* Note that you can use the OES_matrix_get extension, if present, to get
* the current modelView and projection matrices.
*
* @param winX window coordinates X
* @param winY window coordinates Y
* @param winZ window coordinates Z
* @param model the current modelview matrix
* @param modelOffset the offset into the model array where the modelview
* maxtrix data starts.
* @param project the current projection matrix
* @param projectOffset the offset into the project array where the project
* matrix data starts.
* @param view the current view, {x, y, width, height}
* @param viewOffset the offset into the view array where the view vector
* data starts.
* @param obj the output vector {objX, objY, objZ}, that returns the
* computed object coordinates.
* @param objOffset the offset into the obj array where the obj vector data
* starts.
* @return A return value of GL10.GL_TRUE indicates success, a return value
* of GL10.GL_FALSE indicates failure.
*/
public static int gluUnProject(float winX, float winY, float winZ,
float[] model, int modelOffset, float[] project, int projectOffset,
int[] view, int viewOffset, float[] obj, int objOffset) {
float[] scratch = sScratch;
synchronized(scratch) {
final int PM_OFFSET = 0; // 0..15
final int INVPM_OFFSET = 16; // 16..31
final int V_OFFSET = 0; // 0..3 Reuses PM_OFFSET space
Matrix.multiplyMM(scratch, PM_OFFSET, project, projectOffset,
model, modelOffset);
if (!Matrix.invertM(scratch, INVPM_OFFSET, scratch, PM_OFFSET)) {
return GL10.GL_FALSE;
}
scratch[V_OFFSET + 0] =
2.0f * (winX - view[viewOffset + 0]) / view[viewOffset + 2]
- 1.0f;
scratch[V_OFFSET + 1] =
2.0f * (winY - view[viewOffset + 1]) / view[viewOffset + 3]
- 1.0f;
scratch[V_OFFSET + 2] = 2.0f * winZ - 1.0f;
scratch[V_OFFSET + 3] = 1.0f;
Matrix.multiplyMV(obj, objOffset, scratch, INVPM_OFFSET,
scratch, V_OFFSET);
}
return GL10.GL_TRUE;
}
private static final float[] sScratch = new float[32];
}
|
