/*
* Copyright (C) 2012 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.android.internal.telephony;
/**
* @hide
*/
public class PhoneConstants {
/**
* The phone state. One of the following:<p>
* <ul>
* <li>IDLE = no phone activity</li>
* <li>RINGING = a phone call is ringing or call waiting.
* In the latter case, another call is active as well</li>
* <li>OFFHOOK = The phone is off hook. At least one call
* exists that is dialing, active or holding and no calls are
* ringing or waiting.</li>
* </ul>
*/
public enum State {
IDLE, RINGING, OFFHOOK;
};
/**
* The state of a data connection.
* <ul>
* <li>CONNECTED = IP traffic should be available</li>
* <li>CONNECTING = Currently setting up data connection</li>
* <li>DISCONNECTED = IP not available</li>
* <li>SUSPENDED = connection is created but IP traffic is
* temperately not available. i.e. voice call is in place
* in 2G network</li>
* </ul>
*/
public enum DataState {
CONNECTED, CONNECTING, DISCONNECTED, SUSPENDED;
};
public static final String STATE_KEY = "state";
// Radio Type
public static final int PHONE_TYPE_NONE = RILConstants.NO_PHONE;
public static final int PHONE_TYPE_GSM = RILConstants.GSM_PHONE;
public static final int PHONE_TYPE_CDMA = RILConstants.CDMA_PHONE;
public static final int PHONE_TYPE_SIP = RILConstants.SIP_PHONE;
public static final int PHONE_TYPE_THIRD_PARTY = RILConstants.THIRD_PARTY_PHONE;
public static final int PHONE_TYPE_IMS = RILConstants.IMS_PHONE;
// Modes for LTE_ON_CDMA
public static final int LTE_ON_CDMA_UNKNOWN = RILConstants.LTE_ON_CDMA_UNKNOWN;
public static final int LTE_ON_CDMA_FALSE = RILConstants.LTE_ON_CDMA_FALSE;
public static final int LTE_ON_CDMA_TRUE = RILConstants.LTE_ON_CDMA_TRUE;
// Number presentation type for caller id display (From internal/Connection.java)
public static final int PRESENTATION_ALLOWED = 1; // normal
public static final int PRESENTATION_RESTRICTED = 2; // block by user
public static final int PRESENTATION_UNKNOWN = 3; // no specified or unknown by network
public static final int PRESENTATION_PAYPHONE = 4; // show pay phone info
public static final String PHONE_NAME_KEY = "phoneName";
public static final String FAILURE_REASON_KEY = "reason";
public static final String STATE_CHANGE_REASON_KEY = "reason";
public static final String DATA_NETWORK_TYPE_KEY = "networkType";
public static final String DATA_FAILURE_CAUSE_KEY = "failCause";
public static final String DATA_APN_TYPE_KEY = "apnType";
public static final String DATA_APN_KEY = "apn";
public static final String DATA_LINK_PROPERTIES_KEY = "linkProperties";
public static final String DATA_NETWORK_CAPABILITIES_KEY = "networkCapabilities";
public static final String DATA_IFACE_NAME_KEY = "iface";
public static final String NETWORK_UNAVAILABLE_KEY = "networkUnvailable";
public static final String DATA_NETWORK_ROAMING_KEY = "networkRoaming";
public static final String PHONE_IN_ECM_STATE = "phoneinECMState";
public static final String REASON_LINK_PROPERTIES_CHANGED = "linkPropertiesChanged";
/**
* Return codes for supplyPinReturnResult and
* supplyPukReturnResult APIs
*/
public static final int PIN_RESULT_SUCCESS = 0;
public static final int PIN_PASSWORD_INCORRECT = 1;
public static final int PIN_GENERAL_FAILURE = 2;
/**
* Return codes for <code>enableApnType()</code>
*/
public static final int APN_ALREADY_ACTIVE = 0;
public static final int APN_REQUEST_STARTED = 1;
public static final int APN_TYPE_NOT_AVAILABLE = 2;
public static final int APN_REQUEST_FAILED = 3;
public static final int APN_ALREADY_INACTIVE = 4;
/**
* APN types for data connections. These are usage categories for an APN
* entry. One APN entry may support multiple APN types, eg, a single APN
* may service regular internet traffic ("default") as well as MMS-specific
* connections.<br/>
* APN_TYPE_ALL is a special type to indicate that this APN entry can
* service all data connections.
*/
public static final String APN_TYPE_ALL = "*";
/** APN type for default data traffic */
public static final String APN_TYPE_DEFAULT = "default";
/** APN type for MMS traffic */
public static final String APN_TYPE_MMS = "mms";
/** APN type for SUPL assisted GPS */
public static final String APN_TYPE_SUPL = "supl";
/** APN type for DUN traffic */
public static final String APN_TYPE_DUN = "dun";
/** APN type for HiPri traffic */
public static final String APN_TYPE_HIPRI = "hipri";
/** APN type for FOTA */
public static final String APN_TYPE_FOTA = "fota";
/** APN type for IMS */
public static final String APN_TYPE_IMS = "ims";
/** APN type for CBS */
public static final String APN_TYPE_CBS = "cbs";
/** APN type for IA Initial Attach APN */
public static final String APN_TYPE_IA = "ia";
/** APN type for IA Emergency PDN */
public static final String APN_TYPE_EMERGENCY = "emergency";
public static final int RIL_CARD_MAX_APPS = 8;
public static final int DEFAULT_CARD_INDEX = 0;
public static final int MAX_PHONE_COUNT_SINGLE_SIM = 1;
public static final int MAX_PHONE_COUNT_DUAL_SIM = 2;
public static final int MAX_PHONE_COUNT_TRI_SIM = 3;
public static final String PHONE_KEY = "phone";
public static final String SLOT_KEY = "slot";
// FIXME: This is used to pass a subId via intents, we need to look at its usage, which is
// FIXME: extensive, and see if this should be an array of all active subId's or ...?
public static final String SUBSCRIPTION_KEY = "subscription";
public static final String SUB_SETTING = "subSettings";
public static final int SUB1 = 0;
public static final int SUB2 = 1;
public static final int SUB3 = 2;
// TODO: Remove these constants and use an int instead.
public static final int SIM_ID_1 = 0;
public static final int SIM_ID_2 = 1;
public static final int SIM_ID_3 = 2;
public static final int SIM_ID_4 = 3;
// ICC SIM Application Types
// TODO: Replace the IccCardApplicationStatus.AppType enums with these constants
public static final int APPTYPE_UNKNOWN = 0;
public static final int APPTYPE_SIM = 1;
public static final int APPTYPE_USIM = 2;
public static final int APPTYPE_RUIM = 3;
public static final int APPTYPE_CSIM = 4;
public static final int APPTYPE_ISIM = 5;
public enum CardUnavailableReason {
REASON_CARD_REMOVED,
REASON_RADIO_UNAVAILABLE,
REASON_SIM_REFRESH_RESET
};
// Initial MTU value.
public static final int UNSET_MTU = 0;
//FIXME maybe this shouldn't be here - sprout only
public static final int CAPABILITY_3G = 1;
}
|
