FileDocCategorySizeDatePackage
Properties.javaAPI DocJava SE 6 API42069Tue Jun 10 00:25:54 BST 2008java.util

Properties

public class Properties extends Hashtable
The Properties class represents a persistent set of properties. The Properties can be saved to a stream or loaded from a stream. Each key and its corresponding value in the property list is a string.

A property list can contain another property list as its "defaults"; this second property list is searched if the property key is not found in the original property list.

Because Properties inherits from Hashtable, the put and putAll methods can be applied to a Properties object. Their use is strongly discouraged as they allow the caller to insert entries whose keys or values are not Strings. The setProperty method should be used instead. If the store or save method is called on a "compromised" Properties object that contains a non-String key or value, the call will fail. Similarly, the call to the propertyNames or list method will fail if it is called on a "compromised" Properties object that contains a non-String key.

The {@link #load(java.io.Reader) load(Reader)} / {@link #store(java.io.Writer, java.lang.String) store(Writer, String)} methods load and store properties from and to a character based stream in a simple line-oriented format specified below. The {@link #load(java.io.InputStream) load(InputStream)} / {@link #store(java.io.OutputStream, java.lang.String) store(OutputStream, String)} methods work the same way as the load(Reader)/store(Writer, String) pair, except the input/output stream is encoded in ISO 8859-1 character encoding. Characters that cannot be directly represented in this encoding can be written using Unicode escapes ; only a single 'u' character is allowed in an escape sequence. The native2ascii tool can be used to convert property files to and from other character encodings.

The {@link #loadFromXML(InputStream)} and {@link #storeToXML(OutputStream, String, String)} methods load and store properties in a simple XML format. By default the UTF-8 character encoding is used, however a specific encoding may be specified if required. An XML properties document has the following DOCTYPE declaration:

<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
Note that the system URI (http://java.sun.com/dtd/properties.dtd) is not accessed when exporting or importing properties; it merely serves as a string to uniquely identify the DTD, which is:
<?xml version="1.0" encoding="UTF-8"?>

<!-- DTD for properties -->

<!ELEMENT properties ( comment?, entry* ) >

<!ATTLIST properties version CDATA #FIXED "1.0">

<!ELEMENT comment (#PCDATA) >

<!ELEMENT entry (#PCDATA) >

<!ATTLIST entry key CDATA #REQUIRED>
see
native2ascii tool for Solaris
see
native2ascii tool for Windows

This class is thread-safe: multiple threads can share a single Properties object without the need for external synchronization.

author
Arthur van Hoff
author
Michael McCloskey
author
Xueming Shen
version
1.96, 08/07/06
since
JDK1.0

Fields Summary
private static final long
serialVersionUID
use serialVersionUID from JDK 1.1.X for interoperability
protected Properties
defaults
A property list that contains default values for any keys not found in this property list.
private static final char[]
hexDigit
A table of hex digits
Constructors Summary
public Properties()
Creates an empty property list with no default values.


                  
      
	this(null);
    
public Properties(Properties defaults)
Creates an empty property list with the specified defaults.

param
defaults the defaults.

	this.defaults = defaults;
    
Methods Summary
private synchronized voidenumerate(java.util.Hashtable h)
Enumerates all key/value pairs in the specified hashtable.

param
h the hashtable
throws
ClassCastException if any of the property keys is not of String type.

	if (defaults != null) {
	    defaults.enumerate(h);
	}
	for (Enumeration e = keys() ; e.hasMoreElements() ;) {
	    String key = (String)e.nextElement();
	    h.put(key, get(key));
	}
    
private synchronized voidenumerateStringProperties(java.util.Hashtable h)
Enumerates all key/value pairs in the specified hashtable and omits the property if the key or value is not a string.

param
h the hashtable

	if (defaults != null) {
	    defaults.enumerateStringProperties(h);
	}
	for (Enumeration e = keys() ; e.hasMoreElements() ;) {
	    Object k = e.nextElement();
            Object v = get(k);
            if (k instanceof String && v instanceof String) {
	        h.put((String) k, (String) v);
            }
	}
    
public java.lang.StringgetProperty(java.lang.String key)
Searches for the property with the specified key in this property list. If the key is not found in this property list, the default property list, and its defaults, recursively, are then checked. The method returns null if the property is not found.

param
key the property key.
return
the value in this property list with the specified key value.
see
#setProperty
see
#defaults

	Object oval = super.get(key);
	String sval = (oval instanceof String) ? (String)oval : null;
	return ((sval == null) && (defaults != null)) ? defaults.getProperty(key) : sval;
    
public java.lang.StringgetProperty(java.lang.String key, java.lang.String defaultValue)
Searches for the property with the specified key in this property list. If the key is not found in this property list, the default property list, and its defaults, recursively, are then checked. The method returns the default value argument if the property is not found.

param
key the hashtable key.
param
defaultValue a default value.
return
the value in this property list with the specified key value.
see
#setProperty
see
#defaults

	String val = getProperty(key);
	return (val == null) ? defaultValue : val;
    
public voidlist(java.io.PrintStream out)
Prints this property list out to the specified output stream. This method is useful for debugging.

param
out an output stream.
throws
ClassCastException if any key in this property list is not a string.

	out.println("-- listing properties --");
	Hashtable h = new Hashtable();
	enumerate(h);
	for (Enumeration e = h.keys() ; e.hasMoreElements() ;) {
	    String key = (String)e.nextElement();
	    String val = (String)h.get(key);
	    if (val.length() > 40) {
                val = val.substring(0, 37) + "...";
	    }
	    out.println(key + "=" + val);
	}
    
public voidlist(java.io.PrintWriter out)
Prints this property list out to the specified output stream. This method is useful for debugging.

param
out an output stream.
throws
ClassCastException if any key in this property list is not a string.
since
JDK1.1

	out.println("-- listing properties --");
	Hashtable h = new Hashtable();
	enumerate(h);
	for (Enumeration e = h.keys() ; e.hasMoreElements() ;) {
	    String key = (String)e.nextElement();
	    String val = (String)h.get(key);
	    if (val.length() > 40) {
		val = val.substring(0, 37) + "...";
	    }
	    out.println(key + "=" + val);
	}
    
public synchronized voidload(java.io.Reader reader)
Reads a property list (key and element pairs) from the input character stream in a simple line-oriented format.

Properties are processed in terms of lines. There are two kinds of line, natural lines and logical lines. A natural line is defined as a line of characters that is terminated either by a set of line terminator characters (\n or \r or \r\n) or by the end of the stream. A natural line may be either a blank line, a comment line, or hold all or some of a key-element pair. A logical line holds all the data of a key-element pair, which may be spread out across several adjacent natural lines by escaping the line terminator sequence with a backslash character \. Note that a comment line cannot be extended in this manner; every natural line that is a comment must have its own comment indicator, as described below. Lines are read from input until the end of the stream is reached.

A natural line that contains only white space characters is considered blank and is ignored. A comment line has an ASCII '#' or '!' as its first non-white space character; comment lines are also ignored and do not encode key-element information. In addition to line terminators, this format considers the characters space (' ', '\u0020'), tab ('\t', '\u0009'), and form feed ('\f', '\u000C') to be white space.

If a logical line is spread across several natural lines, the backslash escaping the line terminator sequence, the line terminator sequence, and any white space at the start of the following line have no affect on the key or element values. The remainder of the discussion of key and element parsing (when loading) will assume all the characters constituting the key and element appear on a single natural line after line continuation characters have been removed. Note that it is not sufficient to only examine the character preceding a line terminator sequence to decide if the line terminator is escaped; there must be an odd number of contiguous backslashes for the line terminator to be escaped. Since the input is processed from left to right, a non-zero even number of 2n contiguous backslashes before a line terminator (or elsewhere) encodes n backslashes after escape processing.

The key contains all of the characters in the line starting with the first non-white space character and up to, but not including, the first unescaped '=', ':', or white space character other than a line terminator. All of these key termination characters may be included in the key by escaping them with a preceding backslash character; for example,

\:\=

would be the two-character key ":=". Line terminator characters can be included using \r and \n escape sequences. Any white space after the key is skipped; if the first non-white space character after the key is '=' or ':', then it is ignored and any white space characters after it are also skipped. All remaining characters on the line become part of the associated element string; if there are no remaining characters, the element is the empty string "". Once the raw character sequences constituting the key and element are identified, escape processing is performed as described above.

As an example, each of the following three lines specifies the key "Truth" and the associated element value "Beauty":

Truth = Beauty
Truth:Beauty
Truth :Beauty
As another example, the following three lines specify a single property:

fruits apple, banana, pear, \
cantaloupe, watermelon, \
kiwi, mango
The key is "fruits" and the associated element is:

"apple, banana, pear, cantaloupe, watermelon, kiwi, mango"
Note that a space appears before each \ so that a space will appear after each comma in the final result; the \, line terminator, and leading white space on the continuation line are merely discarded and are not replaced by one or more other characters.

As a third example, the line:

cheeses
specifies that the key is "cheeses" and the associated element is the empty string "".

Characters in keys and elements can be represented in escape sequences similar to those used for character and string literals (see §3.3 and §3.10.6 of the Java Language Specification). The differences from the character escape sequences and Unicode escapes used for characters and strings are:

  • Octal escapes are not recognized.
  • The character sequence \b does not represent a backspace character.
  • The method does not treat a backslash character, \, before a non-valid escape character as an error; the backslash is silently dropped. For example, in a Java string the sequence "\z" would cause a compile time error. In contrast, this method silently drops the backslash. Therefore, this method treats the two character sequence "\b" as equivalent to the single character 'b'.
  • Escapes are not necessary for single and double quotes; however, by the rule above, single and double quote characters preceded by a backslash still yield single and double quote characters, respectively.
  • Only a single 'u' character is allowed in a Uniocde escape sequence.

The specified stream remains open after this method returns.

param
reader the input character stream.
throws
IOException if an error occurred when reading from the input stream.
throws
IllegalArgumentException if a malformed Unicode escape appears in the input.
since
1.6

        load0(new LineReader(reader));
    
public synchronized voidload(java.io.InputStream inStream)
Reads a property list (key and element pairs) from the input byte stream. The input stream is in a simple line-oriented format as specified in {@link #load(java.io.Reader) load(Reader)} and is assumed to use the ISO 8859-1 character encoding; that is each byte is one Latin1 character. Characters not in Latin1, and certain special characters, are represented in keys and elements using Unicode escapes.

The specified stream remains open after this method returns.

param
inStream the input stream.
exception
IOException if an error occurred when reading from the input stream.
throws
IllegalArgumentException if the input stream contains a malformed Unicode escape sequence.
since
1.2

        load0(new LineReader(inStream));
    
private voidload0(java.util.Properties$LineReader lr)

        char[] convtBuf = new char[1024];
        int limit;
        int keyLen;
        int valueStart;
        char c;
        boolean hasSep;
        boolean precedingBackslash;

        while ((limit = lr.readLine()) >= 0) {
            c = 0;
            keyLen = 0;
            valueStart = limit;
            hasSep = false;

	    //System.out.println("line=<" + new String(lineBuf, 0, limit) + ">");
            precedingBackslash = false;
            while (keyLen < limit) {
                c = lr.lineBuf[keyLen];
                //need check if escaped.
                if ((c == '=" ||  c == ':") && !precedingBackslash) {
                    valueStart = keyLen + 1;
                    hasSep = true;
                    break;
                } else if ((c == ' " || c == '\t" ||  c == '\f") && !precedingBackslash) {
                    valueStart = keyLen + 1;
                    break;
                } 
                if (c == '\\") {
                    precedingBackslash = !precedingBackslash;
                } else {
                    precedingBackslash = false;
                }
                keyLen++;
            }
            while (valueStart < limit) {
                c = lr.lineBuf[valueStart];
                if (c != ' " && c != '\t" &&  c != '\f") {
                    if (!hasSep && (c == '=" ||  c == ':")) {
                        hasSep = true;
                    } else {
                        break;
                    }
                }
                valueStart++;
            }
            String key = loadConvert(lr.lineBuf, 0, keyLen, convtBuf);
            String value = loadConvert(lr.lineBuf, valueStart, limit - valueStart, convtBuf);
	    put(key, value);
	}
    
private java.lang.StringloadConvert(char[] in, int off, int len, char[] convtBuf)

        if (convtBuf.length < len) {
            int newLen = len * 2;
            if (newLen < 0) {
	        newLen = Integer.MAX_VALUE;
	    } 
	    convtBuf = new char[newLen];
        }
        char aChar;
        char[] out = convtBuf; 
        int outLen = 0;
        int end = off + len;

        while (off < end) {
            aChar = in[off++];
            if (aChar == '\\") {
                aChar = in[off++];   
                if(aChar == 'u") {
                    // Read the xxxx
                    int value=0;
		    for (int i=0; i<4; i++) {
		        aChar = in[off++];  
		        switch (aChar) {
		          case '0": case '1": case '2": case '3": case '4":
		          case '5": case '6": case '7": case '8": case '9":
		             value = (value << 4) + aChar - '0";
			     break;
			  case 'a": case 'b": case 'c":
                          case 'd": case 'e": case 'f":
			     value = (value << 4) + 10 + aChar - 'a";
			     break;
			  case 'A": case 'B": case 'C":
                          case 'D": case 'E": case 'F":
			     value = (value << 4) + 10 + aChar - 'A";
			     break;
			  default:
                              throw new IllegalArgumentException(
                                           "Malformed \\uxxxx encoding.");
                        }
                     }
                    out[outLen++] = (char)value;
                } else {
                    if (aChar == 't") aChar = '\t"; 
                    else if (aChar == 'r") aChar = '\r";
                    else if (aChar == 'n") aChar = '\n";
                    else if (aChar == 'f") aChar = '\f"; 
                    out[outLen++] = aChar;
                }
            } else {
	        out[outLen++] = (char)aChar;
            }
        }
        return new String (out, 0, outLen);
    
public synchronized voidloadFromXML(java.io.InputStream in)
Loads all of the properties represented by the XML document on the specified input stream into this properties table.

The XML document must have the following DOCTYPE declaration:

<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
Furthermore, the document must satisfy the properties DTD described above.

The specified stream is closed after this method returns.

param
in the input stream from which to read the XML document.
throws
IOException if reading from the specified input stream results in an IOException.
throws
InvalidPropertiesFormatException Data on input stream does not constitute a valid XML document with the mandated document type.
throws
NullPointerException if in is null.
see
#storeToXML(OutputStream, String, String)
since
1.5

        if (in == null)
            throw new NullPointerException();
        XMLUtils.load(this, in);
        in.close();
    
public java.util.EnumerationpropertyNames()
Returns an enumeration of all the keys in this property list, including distinct keys in the default property list if a key of the same name has not already been found from the main properties list.

return
an enumeration of all the keys in this property list, including the keys in the default property list.
throws
ClassCastException if any key in this property list is not a string.
see
java.util.Enumeration
see
java.util.Properties#defaults
see
#stringPropertyNames

	Hashtable h = new Hashtable();
	enumerate(h);
	return h.keys();
    
public synchronized voidsave(java.io.OutputStream out, java.lang.String comments)
Calls the store(OutputStream out, String comments) method and suppresses IOExceptions that were thrown.

deprecated
This method does not throw an IOException if an I/O error occurs while saving the property list. The preferred way to save a properties list is via the store(OutputStream out, String comments) method or the storeToXML(OutputStream os, String comment) method.
param
out an output stream.
param
comments a description of the property list.
exception
ClassCastException if this Properties object contains any keys or values that are not Strings.

        try {
            store(out, comments);
        } catch (IOException e) {
        }
    
private java.lang.StringsaveConvert(java.lang.String theString, boolean escapeSpace, boolean escapeUnicode)

        int len = theString.length();
        int bufLen = len * 2;
        if (bufLen < 0) {
            bufLen = Integer.MAX_VALUE;
        }
        StringBuffer outBuffer = new StringBuffer(bufLen);

        for(int x=0; x<len; x++) {
            char aChar = theString.charAt(x);
            // Handle common case first, selecting largest block that
            // avoids the specials below
            if ((aChar > 61) && (aChar < 127)) {
                if (aChar == '\\") {
                    outBuffer.append('\\"); outBuffer.append('\\");
                    continue;
                }
                outBuffer.append(aChar);
                continue;
            }
            switch(aChar) {
		case ' ":
		    if (x == 0 || escapeSpace) 
			outBuffer.append('\\");
		    outBuffer.append(' ");
		    break;
                case '\t":outBuffer.append('\\"); outBuffer.append('t");
                          break;
                case '\n":outBuffer.append('\\"); outBuffer.append('n");
                          break;
                case '\r":outBuffer.append('\\"); outBuffer.append('r");
                          break;
                case '\f":outBuffer.append('\\"); outBuffer.append('f");
                          break;
                case '=": // Fall through
                case ':": // Fall through
                case '#": // Fall through
                case '!":
                    outBuffer.append('\\"); outBuffer.append(aChar);
                    break;
                default:
                    if (((aChar < 0x0020) || (aChar > 0x007e)) & escapeUnicode ) {
                        outBuffer.append('\\");
                        outBuffer.append('u");
                        outBuffer.append(toHex((aChar >> 12) & 0xF));
                        outBuffer.append(toHex((aChar >>  8) & 0xF));
                        outBuffer.append(toHex((aChar >>  4) & 0xF));
                        outBuffer.append(toHex( aChar        & 0xF));
                    } else {
                        outBuffer.append(aChar);
                    }
            }
        }
        return outBuffer.toString();
    
public synchronized java.lang.ObjectsetProperty(java.lang.String key, java.lang.String value)
Calls the Hashtable method put. Provided for parallelism with the getProperty method. Enforces use of strings for property keys and values. The value returned is the result of the Hashtable call to put.

param
key the key to be placed into this property list.
param
value the value corresponding to key.
return
the previous value of the specified key in this property list, or null if it did not have one.
see
#getProperty
since
1.2

        return put(key, value);
    
public voidstore(java.io.Writer writer, java.lang.String comments)
Writes this property list (key and element pairs) in this Properties table to the output character stream in a format suitable for using the {@link #load(java.io.Reader) load(Reader)} method.

Properties from the defaults table of this Properties table (if any) are not written out by this method.

If the comments argument is not null, then an ASCII # character, the comments string, and a line separator are first written to the output stream. Thus, the comments can serve as an identifying comment. Any one of a line feed ('\n'), a carriage return ('\r'), or a carriage return followed immediately by a line feed in comments is replaced by a line separator generated by the Writer and if the next character in comments is not character # or character ! then an ASCII # is written out after that line separator.

Next, a comment line is always written, consisting of an ASCII # character, the current date and time (as if produced by the toString method of Date for the current time), and a line separator as generated by the Writer.

Then every entry in this Properties table is written out, one per line. For each entry the key string is written, then an ASCII =, then the associated element string. For the key, all space characters are written with a preceding \ character. For the element, leading space characters, but not embedded or trailing space characters, are written with a preceding \ character. The key and element characters #, !, =, and : are written with a preceding backslash to ensure that they are properly loaded.

After the entries have been written, the output stream is flushed. The output stream remains open after this method returns.

param
writer an output character stream writer.
param
comments a description of the property list.
exception
IOException if writing this property list to the specified output stream throws an IOException.
exception
ClassCastException if this Properties object contains any keys or values that are not Strings.
exception
NullPointerException if writer is null.
since
1.6

        store0((writer instanceof BufferedWriter)?(BufferedWriter)writer
	                                         : new BufferedWriter(writer),
	       comments,
	       false);
    
public voidstore(java.io.OutputStream out, java.lang.String comments)
Writes this property list (key and element pairs) in this Properties table to the output stream in a format suitable for loading into a Properties table using the {@link #load(InputStream) load(InputStream)} method.

Properties from the defaults table of this Properties table (if any) are not written out by this method.

This method outputs the comments, properties keys and values in the same format as specified in {@link #store(java.io.Writer, java.lang.String) store(Writer)}, with the following differences:

  • The stream is written using the ISO 8859-1 character encoding.
  • Characters not in Latin-1 in the comments are written as \uxxxx for their appropriate unicode hexadecimal value xxxx.
  • Characters less than \u0020 and characters greater than \u007E in property keys or values are written as \uxxxx for the appropriate hexadecimal value xxxx.

After the entries have been written, the output stream is flushed. The output stream remains open after this method returns.

param
out an output stream.
param
comments a description of the property list.
exception
IOException if writing this property list to the specified output stream throws an IOException.
exception
ClassCastException if this Properties object contains any keys or values that are not Strings.
exception
NullPointerException if out is null.
since
1.2

        store0(new BufferedWriter(new OutputStreamWriter(out, "8859_1")),
	       comments,
	       true);
    
private voidstore0(java.io.BufferedWriter bw, java.lang.String comments, boolean escUnicode)

        if (comments != null) {
            writeComments(bw, comments);
        }
        bw.write("#" + new Date().toString());
        bw.newLine();
	synchronized (this) {
            for (Enumeration e = keys(); e.hasMoreElements();) {
                String key = (String)e.nextElement();
		String val = (String)get(key);
		key = saveConvert(key, true, escUnicode);
		/* No need to escape embedded and trailing spaces for value, hence
		 * pass false to flag.
		 */
		val = saveConvert(val, false, escUnicode);
		bw.write(key + "=" + val);
                bw.newLine();
	    }
	}
        bw.flush();
    
public synchronized voidstoreToXML(java.io.OutputStream os, java.lang.String comment)
Emits an XML document representing all of the properties contained in this table.

An invocation of this method of the form props.storeToXML(os, comment) behaves in exactly the same way as the invocation props.storeToXML(os, comment, "UTF-8");.

param
os the output stream on which to emit the XML document.
param
comment a description of the property list, or null if no comment is desired.
throws
IOException if writing to the specified output stream results in an IOException.
throws
NullPointerException if os is null.
throws
ClassCastException if this Properties object contains any keys or values that are not Strings.
see
#loadFromXML(InputStream)
since
1.5

        if (os == null)
            throw new NullPointerException();
        storeToXML(os, comment, "UTF-8");
    
public synchronized voidstoreToXML(java.io.OutputStream os, java.lang.String comment, java.lang.String encoding)
Emits an XML document representing all of the properties contained in this table, using the specified encoding.

The XML document will have the following DOCTYPE declaration:

<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">

If the specified comment is null then no comment will be stored in the document.

The specified stream remains open after this method returns.

param
os the output stream on which to emit the XML document.
param
comment a description of the property list, or null if no comment is desired.
throws
IOException if writing to the specified output stream results in an IOException.
throws
NullPointerException if os is null, or if encoding is null.
throws
ClassCastException if this Properties object contains any keys or values that are not Strings.
see
#loadFromXML(InputStream)
since
1.5

        if (os == null)
            throw new NullPointerException();
        XMLUtils.save(this, os, comment, encoding);
    
public java.util.SetstringPropertyNames()
Returns a set of keys in this property list where the key and its corresponding value are strings, including distinct keys in the default property list if a key of the same name has not already been found from the main properties list. Properties whose key or value is not of type String are omitted.

The returned set is not backed by the Properties object. Changes to this Properties are not reflected in the set, or vice versa.

return
a set of keys in this property list where the key and its corresponding value are strings, including the keys in the default property list.
see
java.util.Properties#defaults
since
1.6

	Hashtable<String, String> h = new Hashtable<String, String>();
	enumerateStringProperties(h);
	return h.keySet();
    
private static chartoHex(int nibble)
Convert a nibble to a hex character

param
nibble the nibble to convert.

	return hexDigit[(nibble & 0xF)];
    
private static voidwriteComments(java.io.BufferedWriter bw, java.lang.String comments)

        bw.write("#");
        int len = comments.length();  
        int current = 0;
        int last = 0;
        char[] uu = new char[6];
        uu[0] = '\\";
        uu[1] = 'u";
        while (current < len) {
            char c = comments.charAt(current);
	    if (c > '\u00ff" || c == '\n" || c == '\r") {
	        if (last != current) 
                    bw.write(comments.substring(last, current));
                if (c > '\u00ff") {
                    uu[2] = toHex((c >> 12) & 0xf);
                    uu[3] = toHex((c >>  8) & 0xf);
                    uu[4] = toHex((c >>  4) & 0xf);
                    uu[5] = toHex( c        & 0xf);
                    bw.write(new String(uu));
                } else {
                    bw.newLine();
                    if (c == '\r" && 
			current != len - 1 && 
			comments.charAt(current + 1) == '\n") {
                        current++;
                    }
                    if (current == len - 1 ||
                        (comments.charAt(current + 1) != '#" &&
			comments.charAt(current + 1) != '!"))
                        bw.write("#");
                }
                last = current + 1;
	    } 
            current++;
	}
        if (last != current) 
            bw.write(comments.substring(last, current));
        bw.newLine();