/*
* Copyright (C) 2007 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.android.internal.telephony;
import android.content.Context;
import android.os.Handler;
import android.os.Message;
import android.telephony.CellLocation;
import android.telephony.ServiceState;
import com.android.internal.telephony.gsm.NetworkInfo;
import com.android.internal.telephony.gsm.PdpConnection;
import com.android.internal.telephony.test.SimulatedRadioControl;
import java.util.List;
/**
* Internal interface used to control the phone; SDK developers cannot
* obtain this interface.
*
* {@hide}
*
*/
public interface Phone {
/** used to enable additional debug messages */
static final boolean DEBUG_PHONE = true;
/**
* The phone state. One of the following:<p>
* <ul>
* <li>IDLE = no phone activity</li>
* <li>RINGING = a phone call is ringing or call waiting.
* In the latter case, another call is active as well</li>
* <li>OFFHOOK = The phone is off hook. At least one call
* exists that is dialing, active or holding and no calls are
* ringing or waiting.</li>
* </ul>
*/
enum State {
IDLE, RINGING, OFFHOOK;
};
/**
* The state of a data connection.
* <ul>
* <li>CONNECTED = IP traffic should be available</li>
* <li>CONNECTING = Currently setting up data connection</li>
* <li>DISCONNECTED = IP not available</li>
* <li>SUSPENDED = connection is created but IP traffic is
* temperately not available. i.e. voice call is in place
* in 2G network</li>
* </ul>
*/
enum DataState {
CONNECTED, CONNECTING, DISCONNECTED, SUSPENDED;
};
enum DataActivityState {
/**
* The state of a data activity.
* <ul>
* <li>NONE = No traffic</li>
* <li>DATAIN = Receiving IP ppp traffic</li>
* <li>DATAOUT = Sending IP ppp traffic</li>
* <li>DATAINANDOUT = Both receiving and sending IP ppp traffic</li>
* </ul>
*/
NONE, DATAIN, DATAOUT, DATAINANDOUT;
};
enum SuppService {
UNKNOWN, SWITCH, SEPARATE, TRANSFER, CONFERENCE, REJECT, HANGUP;
};
static final String STATE_KEY = "state";
static final String PHONE_NAME_KEY = "phoneName";
static final String FAILURE_REASON_KEY = "reason";
static final String STATE_CHANGE_REASON_KEY = "reason";
static final String DATA_APN_TYPE_KEY = "apnType";
static final String DATA_APN_KEY = "apn";
static final String DATA_IFACE_NAME_KEY = "iface";
static final String NETWORK_UNAVAILABLE_KEY = "networkUnvailable";
/**
* APN types for data connections. These are usage categories for an APN
* entry. One APN entry may support multiple APN types, eg, a single APN
* may service regular internet traffic ("default") as well as MMS-specific
* connections.<br/>
* APN_TYPE_ALL is a special type to indicate that this APN entry can
* service all data connections.
*/
static final String APN_TYPE_ALL = "*";
/** APN type for default data traffic */
static final String APN_TYPE_DEFAULT = "default";
/** APN type for MMS traffic */
static final String APN_TYPE_MMS = "mms";
// "Features" accessible through the connectivity manager
static final String FEATURE_ENABLE_MMS = "enableMMS";
/**
* Return codes for <code>enableApnType()</code>
*/
static final int APN_ALREADY_ACTIVE = 0;
static final int APN_REQUEST_STARTED = 1;
static final int APN_TYPE_NOT_AVAILABLE = 2;
static final int APN_REQUEST_FAILED = 3;
/**
* Optional reasons for disconnect and connect
*/
static final String REASON_ROAMING_ON = "roamingOn";
static final String REASON_ROAMING_OFF = "roamingOff";
static final String REASON_DATA_DISABLED = "dataDisabled";
static final String REASON_DATA_ENABLED = "dataEnabled";
static final String REASON_GPRS_ATTACHED = "gprsAttached";
static final String REASON_GPRS_DETACHED = "gprsDetached";
static final String REASON_APN_CHANGED = "apnChanged";
static final String REASON_APN_SWITCHED = "apnSwitched";
static final String REASON_RESTORE_DEFAULT_APN = "restoreDefaultApn";
static final String REASON_RADIO_TURNED_OFF = "radioTurnedOff";
static final String REASON_PDP_RESET = "pdpReset";
static final String REASON_VOICE_CALL_ENDED = "2GVoiceCallEnded";
static final String REASON_VOICE_CALL_STARTED = "2GVoiceCallStarted";
static final String REASON_PS_RESTRICT_ENABLED = "psRestrictEnabled";
static final String REASON_PS_RESTRICT_DISABLED = "psRestrictDisabled";
static final String REASON_SIM_LOADED = "simLoaded";
// Used for band mode selection methods
static final int BM_UNSPECIFIED = 0; // selected by baseband automatically
static final int BM_EURO_BAND = 1; // GSM-900 / DCS-1800 / WCDMA-IMT-2000
static final int BM_US_BAND = 2; // GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900
static final int BM_JPN_BAND = 3; // WCDMA-800 / WCDMA-IMT-2000
static final int BM_AUS_BAND = 4; // GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000
static final int BM_AUS2_BAND = 5; // GSM-900 / DCS-1800 / WCDMA-850
static final int BM_BOUNDARY = 6; // upper band boundary
// Used for preferred network type
static final int NT_AUTO_TYPE = 0; // WCDMA preferred (auto mode)
static final int NT_GSM_TYPE = 1; // GSM only
static final int NT_WCDMA_TYPE = 2; // WCDMA only
/**
* Get the current ServiceState. Use
* <code>registerForServiceStateChanged</code> to be informed of
* updates.
*/
ServiceState getServiceState();
/**
* Get the current CellLocation.
*/
CellLocation getCellLocation();
/**
* Get the current DataState. No change notification exists at this
* interface -- use
* {@link com.android.internal.telephony.PhoneStateIntentReceiver PhoneStateIntentReceiver} instead.
*/
DataState getDataConnectionState();
/**
* Get the current DataActivityState. No change notification exists at this
* interface -- use
* {@link TelephonyManager} instead.
*/
DataActivityState getDataActivityState();
/**
* Gets the context for the phone, as set at initialization time.
*/
Context getContext();
/**
* Get current coarse-grained voice call state.
* Use {@link #registerForPhoneStateChanged(Handler, int, Object)
* registerForPhoneStateChanged()} for change notification. <p>
* If the phone has an active call and call waiting occurs,
* then the phone state is RINGING not OFFHOOK
* <strong>Note:</strong>
* This registration point provides notification of finer-grained
* changes.<p>
*
*/
State getState();
/**
* Returns a string identifier for this phone interface for parties
* outside the phone app process.
* @return The string name.
*/
String getPhoneName();
/**
* Returns an array of string identifiers for the APN types serviced by the
* currently active or last connected APN.
* @return The string array.
*/
String[] getActiveApnTypes();
/**
* Returns a string identifier for currently active or last connected APN.
* @return The string name.
*/
String getActiveApn();
/**
* Get current signal strength. No change notification available on this
* interface. Use <code>PhoneStateNotifier</code> or an equivalent.
* An ASU is 0-31 or -1 if unknown (for GSM, dBm = -113 - 2 * asu).
* The following special values are defined:</p>
* <ul><li>0 means "-113 dBm or less".</li>
* <li>31 means "-51 dBm or greater".</li></ul>
*
* @return Current signal strength in ASU's.
*/
int getSignalStrengthASU();
/**
* Notifies when a previously untracked non-ringing/waiting connection has appeared.
* This is likely due to some other entity (eg, SIM card application) initiating a call.
*/
void registerForUnknownConnection(Handler h, int what, Object obj);
/**
* Unregisters for unknown connection notifications.
*/
void unregisterForUnknownConnection(Handler h);
/**
* Notifies when any aspect of the voice call state changes.
* Resulting events will have an AsyncResult in <code>Message.obj</code>.
* AsyncResult.userData will be set to the obj argument here.
* The <em>h</em> parameter is held only by a weak reference.
*/
void registerForPhoneStateChanged(Handler h, int what, Object obj);
/**
* Unregisters for voice call state change notifications.
* Extraneous calls are tolerated silently.
*/
void unregisterForPhoneStateChanged(Handler h);
/**
* Notifies when a new ringing or waiting connection has appeared.<p>
*
* Messages received from this:
* Message.obj will be an AsyncResult
* AsyncResult.userObj = obj
* AsyncResult.result = a Connection. <p>
* Please check Connection.isRinging() to make sure the Connection
* has not dropped since this message was posted.
* If Connection.isRinging() is true, then
* Connection.getCall() == Phone.getRingingCall()
*/
void registerForNewRingingConnection(Handler h, int what, Object obj);
/**
* Unregisters for new ringing connection notification.
* Extraneous calls are tolerated silently
*/
void unregisterForNewRingingConnection(Handler h);
/**
* Notifies when an incoming call rings.<p>
*
* Messages received from this:
* Message.obj will be an AsyncResult
* AsyncResult.userObj = obj
* AsyncResult.result = a Connection. <p>
*/
void registerForIncomingRing(Handler h, int what, Object obj);
/**
* Unregisters for ring notification.
* Extraneous calls are tolerated silently
*/
void unregisterForIncomingRing(Handler h);
/**
* Notifies when a voice connection has disconnected, either due to local
* or remote hangup or error.
*
* Messages received from this will have the following members:<p>
* <ul><li>Message.obj will be an AsyncResult</li>
* <li>AsyncResult.userObj = obj</li>
* <li>AsyncResult.result = a Connection object that is
* no longer connected.</li></ul>
*/
void registerForDisconnect(Handler h, int what, Object obj);
/**
* Unregisters for voice disconnection notification.
* Extraneous calls are tolerated silently
*/
void unregisterForDisconnect(Handler h);
/**
* Register for notifications of initiation of a new MMI code request.
* MMI codes for GSM are discussed in 3GPP TS 22.030.<p>
*
* Example: If Phone.dial is called with "*#31#", then the app will
* be notified here.<p>
*
* The returned <code>Message.obj</code> will contain an AsyncResult.
*
* <code>obj.result</code> will be an "MmiCode" object.
*/
void registerForMmiInitiate(Handler h, int what, Object obj);
/**
* Unregisters for new MMI initiate notification.
* Extraneous calls are tolerated silently
*/
void unregisterForMmiInitiate(Handler h);
/**
* Register for notifications that an MMI request has completed
* its network activity and is in its final state. This may mean a state
* of COMPLETE, FAILED, or CANCELLED.
*
* <code>Message.obj</code> will contain an AsyncResult.
* <code>obj.result</code> will be an "MmiCode" object
*/
void registerForMmiComplete(Handler h, int what, Object obj);
/**
* Unregisters for MMI complete notification.
* Extraneous calls are tolerated silently
*/
void unregisterForMmiComplete(Handler h);
/**
* Returns a list of MMI codes that are pending. (They have initiated
* but have not yet completed).
* Presently there is only ever one.
* Use <code>registerForMmiInitiate</code>
* and <code>registerForMmiComplete</code> for change notification.
*/
public List<? extends MmiCode> getPendingMmiCodes();
/**
* Sends user response to a USSD REQUEST message. An MmiCode instance
* representing this response is sent to handlers registered with
* registerForMmiInitiate.
*
* @param ussdMessge Message to send in the response.
*/
public void sendUssdResponse(String ussdMessge);
/**
* Register for ServiceState changed.
* Message.obj will contain an AsyncResult.
* AsyncResult.result will be a ServiceState instance
*/
void registerForServiceStateChanged(Handler h, int what, Object obj);
/**
* Unregisters for ServiceStateChange notification.
* Extraneous calls are tolerated silently
*/
void unregisterForServiceStateChanged(Handler h);
/**
* Register for Supplementary Service notifications from the network.
* Message.obj will contain an AsyncResult.
* AsyncResult.result will be a SuppServiceNotification instance.
*
* @param h Handler that receives the notification message.
* @param what User-defined message code.
* @param obj User object.
*/
void registerForSuppServiceNotification(Handler h, int what, Object obj);
/**
* Unregisters for Supplementary Service notifications.
* Extraneous calls are tolerated silently
*
* @param h Handler to be removed from the registrant list.
*/
void unregisterForSuppServiceNotification(Handler h);
/**
* Register for notifications when a supplementary service attempt fails.
* Message.obj will contain an AsyncResult.
*
* @param h Handler that receives the notification message.
* @param what User-defined message code.
* @param obj User object.
*/
void registerForSuppServiceFailed(Handler h, int what, Object obj);
/**
* Unregister for notifications when a supplementary service attempt fails.
* Extraneous calls are tolerated silently
*
* @param h Handler to be removed from the registrant list.
*/
void unregisterForSuppServiceFailed(Handler h);
/**
* Returns SIM record load state. Use
* <code>getSimCard().registerForReady()</code> for change notification.
*
* @return true if records from the SIM have been loaded and are
* available (if applicable). If not applicable to the underlying
* technology, returns true as well.
*/
boolean getSimRecordsLoaded();
/**
* Returns the SIM card interface for this phone, or null
* if not applicable to underlying technology.
*/
SimCard getSimCard();
/**
* Answers a ringing or waiting call. Active calls, if any, go on hold.
* Answering occurs asynchronously, and final notification occurs via
* {@link #registerForPhoneStateChanged(android.os.Handler, int,
* java.lang.Object) registerForPhoneStateChanged()}.
*
* @exception CallStateException when no call is ringing or waiting
*/
void acceptCall() throws CallStateException;
/**
* Reject (ignore) a ringing call. In GSM, this means UDUB
* (User Determined User Busy). Reject occurs asynchronously,
* and final notification occurs via
* {@link #registerForPhoneStateChanged(android.os.Handler, int,
* java.lang.Object) registerForPhoneStateChanged()}.
*
* @exception CallStateException when no call is ringing or waiting
*/
void rejectCall() throws CallStateException;
/**
* Places any active calls on hold, and makes any held calls
* active. Switch occurs asynchronously and may fail.
* Final notification occurs via
* {@link #registerForPhoneStateChanged(android.os.Handler, int,
* java.lang.Object) registerForPhoneStateChanged()}.
*
* @exception CallStateException if a call is ringing, waiting, or
* dialing/alerting. In these cases, this operation may not be performed.
*/
void switchHoldingAndActive() throws CallStateException;
/**
* Whether or not the phone can conference in the current phone
* state--that is, one call holding and one call active.
* @return true if the phone can conference; false otherwise.
*/
boolean canConference();
/**
* Conferences holding and active. Conference occurs asynchronously
* and may fail. Final notification occurs via
* {@link #registerForPhoneStateChanged(android.os.Handler, int,
* java.lang.Object) registerForPhoneStateChanged()}.
*
* @exception CallStateException if canConference() would return false.
* In these cases, this operation may not be performed.
*/
void conference() throws CallStateException;
/**
* Whether or not the phone can do explicit call transfer in the current
* phone state--that is, one call holding and one call active.
* @return true if the phone can do explicit call transfer; false otherwise.
*/
boolean canTransfer();
/**
* Connects the two calls and disconnects the subscriber from both calls
* Explicit Call Transfer occurs asynchronously
* and may fail. Final notification occurs via
* {@link #registerForPhoneStateChanged(android.os.Handler, int,
* java.lang.Object) registerForPhoneStateChanged()}.
*
* @exception CallStateException if canTransfer() would return false.
* In these cases, this operation may not be performed.
*/
void explicitCallTransfer() throws CallStateException;
/**
* Clears all DISCONNECTED connections from Call connection lists.
* Calls that were in the DISCONNECTED state become idle. This occurs
* synchronously.
*/
void clearDisconnected();
/**
* Gets the foreground call object, which represents all connections that
* are dialing or active (all connections
* that have their audio path connected).<p>
*
* The foreground call is a singleton object. It is constant for the life
* of this phone. It is never null.<p>
*
* The foreground call will only ever be in one of these states:
* IDLE, ACTIVE, DIALING, ALERTING, or DISCONNECTED.
*
* State change notification is available via
* {@link #registerForPhoneStateChanged(android.os.Handler, int,
* java.lang.Object) registerForPhoneStateChanged()}.
*/
Call getForegroundCall();
/**
* Gets the background call object, which represents all connections that
* are holding (all connections that have been accepted or connected, but
* do not have their audio path connected). <p>
*
* The background call is a singleton object. It is constant for the life
* of this phone object . It is never null.<p>
*
* The background call will only ever be in one of these states:
* IDLE, HOLDING or DISCONNECTED.
*
* State change notification is available via
* {@link #registerForPhoneStateChanged(android.os.Handler, int,
* java.lang.Object) registerForPhoneStateChanged()}.
*/
Call getBackgroundCall();
/**
* Gets the ringing call object, which represents an incoming
* connection (if present) that is pending answer/accept. (This connection
* may be RINGING or WAITING, and there may be only one.)<p>
* The ringing call is a singleton object. It is constant for the life
* of this phone. It is never null.<p>
*
* The ringing call will only ever be in one of these states:
* IDLE, INCOMING, WAITING or DISCONNECTED.
*
* State change notification is available via
* {@link #registerForPhoneStateChanged(android.os.Handler, int,
* java.lang.Object) registerForPhoneStateChanged()}.
*/
Call getRingingCall();
/**
* Initiate a new voice connection. This happens asynchronously, so you
* cannot assume the audio path is connected (or a call index has been
* assigned) until PhoneStateChanged notification has occurred.
*
* @exception CallStateException if a new outgoing call is not currently
* possible because no more call slots exist or a call exists that is
* dialing, alerting, ringing, or waiting. Other errors are
* handled asynchronously.
*/
Connection dial(String dialString) throws CallStateException;
/**
* Handles PIN MMI commands (PIN/PIN2/PUK/PUK2), which are initiated
* without SEND (so <code>dial</code> is not appropriate).
*
* @param dialString the MMI command to be executed.
* @return true if MMI command is executed.
*/
boolean handlePinMmi(String dialString);
/**
* Handles in-call MMI commands. While in a call, or while receiving a
* call, use this to execute MMI commands.
* see 3GPP 20.030, section 6.5.5.1 for specs on the allowed MMI commands.
*
* @param command the MMI command to be executed.
* @return true if the MMI command is executed.
* @throws CallStateException
*/
boolean handleInCallMmiCommands(String command) throws CallStateException;
/**
* Play a DTMF tone on the active call. Ignored if there is no active call.
* @param c should be one of 0-9, '*' or '#'. Other values will be
* silently ignored.
*/
void sendDtmf(char c);
/**
* Start to paly a DTMF tone on the active call. Ignored if there is no active call
* or there is a playing DTMF tone.
* @param c should be one of 0-9, '*' or '#'. Other values will be
* silently ignored.
*/
void startDtmf(char c);
/**
* Stop the playing DTMF tone. Ignored if there is no playing DTMF
* tone or no active call.
*/
void stopDtmf();
/**
* Sets the radio power on/off state (off is sometimes
* called "airplane mode"). Current state can be gotten via
* {@link #getServiceState()}.{@link
* android.telephony.ServiceState#getState() getState()}.
* <strong>Note: </strong>This request is asynchronous.
* getServiceState().getState() will not change immediately after this call.
* registerForServiceStateChanged() to find out when the
* request is complete.
*
* @param power true means "on", false means "off".
*/
void setRadioPower(boolean power);
/**
* Get voice message waiting indicator status. No change notification
* available on this interface. Use PhoneStateNotifier or similar instead.
*
* @return true if there is a voice message waiting
*/
boolean getMessageWaitingIndicator();
/**
* Get voice call forwarding indicator status. No change notification
* available on this interface. Use PhoneStateNotifier or similar instead.
*
* @return true if there is a voice call forwarding
*/
boolean getCallForwardingIndicator();
/**
* Get the line 1 phone number (MSISDN).<p>
*
* @return phone number. May return null if not
* available or the SIM is not ready
*/
String getLine1Number();
/**
* Returns the alpha tag associated with the msisdn number.
* If there is no alpha tag associated or the record is not yet available,
* returns a default localized string. <p>
*/
String getLine1AlphaTag();
/**
* Sets the MSISDN phone number in the SIM card.
*
* @param alphaTag the alpha tag associated with the MSISDN phone number
* (see getMsisdnAlphaTag)
* @param number the new MSISDN phone number to be set on the SIM.
* @param onComplete a callback message when the action is completed.
*/
void setLine1Number(String alphaTag, String number, Message onComplete);
/**
* Get the voice mail access phone number. Typically dialed when the
* user holds the "1" key in the phone app. May return null if not
* available or the SIM is not ready.<p>
*/
String getVoiceMailNumber();
/**
* Returns the alpha tag associated with the voice mail number.
* If there is no alpha tag associated or the record is not yet available,
* returns a default localized string. <p>
*
* Please use this value instead of some other localized string when
* showing a name for this number in the UI. For example, call log
* entries should show this alpha tag. <p>
*
* Usage of this alpha tag in the UI is a common carrier requirement.
*/
String getVoiceMailAlphaTag();
/**
* setVoiceMailNumber
* sets the voicemail number in the SIM card.
*
* @param alphaTag the alpha tag associated with the voice mail number
* (see getVoiceMailAlphaTag)
* @param voiceMailNumber the new voicemail number to be set on the SIM.
* @param onComplete a callback message when the action is completed.
*/
void setVoiceMailNumber(String alphaTag,
String voiceMailNumber,
Message onComplete);
/**
* getCallForwardingOptions
* gets a call forwarding option. The return value of
* ((AsyncResult)onComplete.obj) is an array of CallForwardInfo.
*
* @param commandInterfaceCFReason is one of the valid call forwarding
* CF_REASONS, as defined in
* <code>com.android.internal.telephony.gsm.CommandsInterface</code>
* @param onComplete a callback message when the action is completed.
* @see com.android.internal.telephony.gsm.CallForwardInfo for details.
*/
void getCallForwardingOption(int commandInterfaceCFReason,
Message onComplete);
/**
* setCallForwardingOptions
* sets a call forwarding option.
*
* @param commandInterfaceCFReason is one of the valid call forwarding
* CF_REASONS, as defined in
* <code>com.android.internal.telephony.gsm.CommandsInterface</code>
* @param commandInterfaceCFAction is one of the valid call forwarding
* CF_ACTIONS, as defined in
* <code>com.android.internal.telephony.gsm.CommandsInterface</code>
* @param dialingNumber is the target phone number to forward calls to
* @param timerSeconds is used by CFNRy to indicate the timeout before
* forwarding is attempted.
* @param onComplete a callback message when the action is completed.
*/
void setCallForwardingOption(int commandInterfaceCFReason,
int commandInterfaceCFAction,
String dialingNumber,
int timerSeconds,
Message onComplete);
/**
* getOutgoingCallerIdDisplay
* gets outgoing caller id display. The return value of
* ((AsyncResult)onComplete.obj) is an array of int, with a length of 2.
*
* @param onComplete a callback message when the action is completed.
* @see com.android.internal.telephony.gsm.CommandsInterface.getCLIR for details.
*/
void getOutgoingCallerIdDisplay(Message onComplete);
/**
* setOutgoingCallerIdDisplay
* sets a call forwarding option.
*
* @param commandInterfaceCLIRMode is one of the valid call CLIR
* modes, as defined in
* <code>com.android.internal.telephony.gsm.CommandsInterface</code>
* @param onComplete a callback message when the action is completed.
*/
void setOutgoingCallerIdDisplay(int commandInterfaceCLIRMode,
Message onComplete);
/**
* getCallWaiting
* gets call waiting activation state. The return value of
* ((AsyncResult)onComplete.obj) is an array of int, with a length of 1.
*
* @param onComplete a callback message when the action is completed.
* @see com.android.internal.telephony.gsm.CommandsInterface.queryCallWaiting for details.
*/
void getCallWaiting(Message onComplete);
/**
* setCallWaiting
* sets a call forwarding option.
*
* @param enable is a boolean representing the state that you are
* requesting, true for enabled, false for disabled.
* @param onComplete a callback message when the action is completed.
*/
void setCallWaiting(boolean enable, Message onComplete);
/**
* Scan available networks. This method is asynchronous; .
* On completion, <code>response.obj</code> is set to an AsyncResult with
* one of the following members:.<p>
*<ul>
* <li><code>response.obj.result</code> will be a <code>List</code> of
* <code>com.android.internal.telephony.gsm.NetworkInfo</code> objects, or</li>
* <li><code>response.obj.exception</code> will be set with an exception
* on failure.</li>
* </ul>
*/
void getAvailableNetworks(Message response);
/**
* Switches network selection mode to "automatic", re-scanning and
* re-selecting a network if appropriate.
*
* @param response The message to dispatch when the network selection
* is complete.
*
* @see #selectNetworkManually(com.android.internal.telephony.gsm.NetworkInfo,
* android.os.Message )
*/
void setNetworkSelectionModeAutomatic(Message response);
/**
* Manually selects a network. <code>response</code> is
* dispatched when this is complete. <code>response.obj</code> will be
* an AsyncResult, and <code>response.obj.exception</code> will be non-null
* on failure.
*
* @see #setNetworkSelectionModeAutomatic(Message)
*/
void selectNetworkManually(NetworkInfo network,
Message response);
/**
* Requests to set the preferred network type for searching and registering
* (CS/PS domain, RAT, and operation mode)
* @param networkType one of NT_*_TYPE
* @param response is callback message
*/
void setPreferredNetworkType(int networkType, Message response);
/**
* Query the preferred network type setting
*
* @param response is callback message to report one of NT_*_TYPE
*/
void getPreferredNetworkType(Message response);
/**
* Query neighboring cell IDs. <code>response</code> is dispatched when
* this is complete. <code>response.obj</code> will be an AsyncResult,
* and <code>response.obj.exception</code> will be non-null on failure.
* On success, <code>AsyncResult.result</code> will be a <code>String[]</code>
* containing the neighboring cell IDs. Index 0 will contain the count
* of available cell IDs. Cell IDs are in hexadecimal format.
*
* @param response callback message that is dispatched when the query
* completes.
*/
void getNeighboringCids(Message response);
/**
* Sets an event to be fired when the telephony system processes
* a post-dial character on an outgoing call.<p>
*
* Messages of type <code>what</code> will be sent to <code>h</code>.
* The <code>obj</code> field of these Message's will be instances of
* <code>AsyncResult</code>. <code>Message.obj.result</code> will be
* a Connection object.<p>
*
* Message.arg1 will be the post dial character being processed,
* or 0 ('\0') if end of string.<p>
*
* If Connection.getPostDialState() == WAIT,
* the application must call
* {@link com.android.internal.telephony.Connection#proceedAfterWaitChar()
* Connection.proceedAfterWaitChar()} or
* {@link com.android.internal.telephony.Connection#cancelPostDial()
* Connection.cancelPostDial()}
* for the telephony system to continue playing the post-dial
* DTMF sequence.<p>
*
* If Connection.getPostDialState() == WILD,
* the application must call
* {@link com.android.internal.telephony.Connection#proceedAfterWildChar
* Connection.proceedAfterWildChar()}
* or
* {@link com.android.internal.telephony.Connection#cancelPostDial()
* Connection.cancelPostDial()}
* for the telephony system to continue playing the
* post-dial DTMF sequence.<p>
*
* Only one post dial character handler may be set. <p>
* Calling this method with "h" equal to null unsets this handler.<p>
*/
void setOnPostDialCharacter(Handler h, int what, Object obj);
/**
* Mutes or unmutes the microphone for the active call. The microphone
* is automatically unmuted if a call is answered, dialed, or resumed
* from a holding state.
*
* @param muted true to mute the microphone,
* false to activate the microphone.
*/
void setMute(boolean muted);
/**
* Gets current mute status. Use
* {@link #registerForPhoneStateChanged(android.os.Handler, int,
* java.lang.Object) registerForPhoneStateChanged()}
* as a change notifcation, although presently phone state changed is not
* fired when setMute() is called.
*
* @return true is muting, false is unmuting
*/
boolean getMute();
/**
* Invokes RIL_REQUEST_OEM_HOOK_RAW on RIL implementation.
*
* @param data The data for the request.
* @param response <strong>On success</strong>,
* (byte[])(((AsyncResult)response.obj).result)
* <strong>On failure</strong>,
* (((AsyncResult)response.obj).result) == null and
* (((AsyncResult)response.obj).exception) being an instance of
* com.android.internal.telephony.gsm.CommandException
*
* @see #invokeOemRilRequestRaw(byte[], android.os.Message)
*/
void invokeOemRilRequestRaw(byte[] data, Message response);
/**
* Invokes RIL_REQUEST_OEM_HOOK_Strings on RIL implementation.
*
* @param strings The strings to make available as the request data.
* @param response <strong>On success</strong>, "response" bytes is
* made available as:
* (String[])(((AsyncResult)response.obj).result).
* <strong>On failure</strong>,
* (((AsyncResult)response.obj).result) == null and
* (((AsyncResult)response.obj).exception) being an instance of
* com.android.internal.telephony.gsm.CommandException
*
* @see #invokeOemRilRequestStrings(java.lang.String[], android.os.Message)
*/
void invokeOemRilRequestStrings(String[] strings, Message response);
/**
* Get the current active PDP context list
*
* @param response <strong>On success</strong>, "response" bytes is
* made available as:
* (String[])(((AsyncResult)response.obj).result).
* <strong>On failure</strong>,
* (((AsyncResult)response.obj).result) == null and
* (((AsyncResult)response.obj).exception) being an instance of
* com.android.internal.telephony.gsm.CommandException
*/
void getPdpContextList(Message response);
/**
* Get current mutiple PDP link status
*
* @return list of pdp link connections
*/
List<PdpConnection> getCurrentPdpList ();
/**
* Udpate LAC and CID in service state for currnet GSM netowrk registration
*
* If get different LAC and/or CID, notifyServiceState will be sent
*
* @param
* <strong>On failure</strong>,
* (((AsyncResult)response.obj).result) == null and
* (((AsyncResult)response.obj).exception) being an instance of
* com.android.internal.telephony.gsm.CommandException
*/
void updateServiceLocation(Message response);
/**
* Enable location update notifications.
*/
void enableLocationUpdates();
/**
* Disable location update notifications.
*/
void disableLocationUpdates();
/**
* For unit tests; don't send notifications to "Phone"
* mailbox registrants if true.
*/
void setUnitTestMode(boolean f);
/**
* @return true If unit test mode is enabled
*/
boolean getUnitTestMode();
/**
* Assign a specified band for RF configuration.
*
* @param bandMode one of BM_*_BAND
* @param response is callback message
*/
void setBandMode(int bandMode, Message response);
/**
* Query the list of band mode supported by RF.
*
* @param response is callback message
* ((AsyncResult)response.obj).result is an int[] with every
* element representing one avialable BM_*_BAND
*/
void queryAvailableBandMode(Message response);
/**
* @return true if enable data connection on roaming
*/
boolean getDataRoamingEnabled();
/**
* @param enable set true if enable data connection on roaming
*/
void setDataRoamingEnabled(boolean enable);
/**
* If this is a simulated phone interface, returns a SimulatedRadioControl.
* @ return A SimulatedRadioControl if this is a simulated interface;
* otherwise, null.
*/
SimulatedRadioControl getSimulatedRadioControl();
/**
* Allow mobile data connections.
* @return {@code true} if the operation started successfully
* <br/>{@code false} if it
* failed immediately.<br/>
* Even in the {@code true} case, it may still fail later
* during setup, in which case an asynchronous indication will
* be supplied.
*/
boolean enableDataConnectivity();
/**
* Disallow mobile data connections, and terminate any that
* are in progress.
* @return {@code true} if the operation started successfully
* <br/>{@code false} if it
* failed immediately.<br/>
* Even in the {@code true} case, it may still fail later
* during setup, in which case an asynchronous indication will
* be supplied.
*/
boolean disableDataConnectivity();
/**
* Enables the specified APN type. Only works for "special" APN types,
* i.e., not the default APN.
* @param type The desired APN type. Cannot be {@link #APN_TYPE_DEFAULT}.
* @return <code>APN_ALREADY_ACTIVE</code> if the current APN
* services the requested type.<br/>
* <code>APN_TYPE_NOT_AVAILABLE</code> if the carrier does not
* support the requested APN.<br/>
* <code>APN_REQUEST_STARTED</code> if the request has been initiated.<br/>
* <code>APN_REQUEST_FAILED</code> if the request was invalid.<br/>
* A <code>ACTION_ANY_DATA_CONNECTION_STATE_CHANGED</code> broadcast will
* indicate connection state progress.
*/
int enableApnType(String type);
/**
* Disables the specified APN type, and switches back to the default APN,
* if necessary. Switching to the default APN will not happen if default
* data traffic has been explicitly disabled via a call to {@link #disableDataConnectivity}.
* <p/>Only works for "special" APN types,
* i.e., not the default APN.
* @param type The desired APN type. Cannot be {@link #APN_TYPE_DEFAULT}.
* @return <code>APN_ALREADY_ACTIVE</code> if the default APN
* is already active.<br/>
* <code>APN_REQUEST_STARTED</code> if the request to switch to the default
* APN has been initiated.<br/>
* <code>APN_REQUEST_FAILED</code> if the request was invalid.<br/>
* A <code>ACTION_ANY_DATA_CONNECTION_STATE_CHANGED</code> broadcast will
* indicate connection state progress.
*/
int disableApnType(String type);
/**
* Report on whether data connectivity is allowed.
*/
boolean isDataConnectivityPossible();
/**
* Returns the name of the network interface used by the specified APN type.
*/
String getInterfaceName(String apnType);
/**
* Returns the IP address of the network interface used by the specified
* APN type.
*/
String getIpAddress(String apnType);
/**
* Returns the gateway for the network interface used by the specified APN
* type.
*/
String getGateway(String apnType);
/**
* Returns the DNS servers for the network interface used by the specified
* APN type.
*/
public String[] getDnsServers(String apnType);
/**
* Retrieves the unique device ID, e.g., IMEI for GSM phones.
*/
String getDeviceId();
/**
* Retrieves the software version number for the device, e.g., IMEI/SV
* for GSM phones.
*/
String getDeviceSvn();
/**
* Retrieves the unique sbuscriber ID, e.g., IMSI for GSM phones.
*/
String getSubscriberId();
/**
* Retrieves the serial number of the SIM, if applicable.
*/
String getSimSerialNumber();
}
|
