/* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package java.nio.charset;
import java.nio.BufferOverflowException;
import java.nio.BufferUnderflowException;
import java.nio.ByteBuffer;
import java.nio.CharBuffer;
import org.apache.harmony.niochar.internal.nls.Messages;
/**
* A converter that can convert a byte sequence from a charset into a 16-bit
* Unicode character sequence.
* <p>
* The input byte sequence is wrapped by a
* {@link java.nio.ByteBuffer ByteBuffer} and the output character sequence is a
* {@link java.nio.CharBuffer CharBuffer}. A decoder instance should be used in
* the following sequence, which is referred to as a decoding operation:
* <ol>
* <li>invoking the {@link #reset() reset} method to reset the decoder if the
* decoder has been used;</li>
* <li>invoking the {@link #decode(ByteBuffer, CharBuffer, boolean) decode}
* method until the additional input is not needed, the <code>endOfInput</code>
* parameter must be set to false, the input buffer must be filled and the
* output buffer must be flushed between invocations;</li>
* <li>invoking the {@link #decode(ByteBuffer, CharBuffer, boolean) decode}
* method for the last time, and then the <code>endOfInput</code> parameter
* must be set to true;</li>
* <li>invoking the {@link #flush(CharBuffer) flush} method to flush the
* output.</li>
* </ol>
* </p>
* <p>
* The {@link #decode(ByteBuffer, CharBuffer, boolean) decode} method will
* convert as many bytes as possible, and the process won't stop until the input
* bytes have run out, the output buffer has been filled or some error has
* happened. A {@link CoderResult CoderResult} instance will be returned to
* indicate the stop reason, and the invoker can identify the result and choose
* further action, which includes filling the input buffer, flushing the output
* buffer or recovering from an error and trying again.
* </p>
* <p>
* There are two common decoding errors. One is named malformed and it is
* returned when the input byte sequence is illegal for the current specific
* charset, the other is named unmappable character and it is returned when a
* problem occurs mapping a legal input byte sequence to its Unicode character
* equivalent.
* </p>
* <p>
* Both errors can be handled in three ways, the default one is to report the
* error to the invoker by a {@link CoderResult CoderResult} instance, and the
* alternatives are to ignore it or to replace the erroneous input with the
* replacement string. The replacement string is "\uFFFD" by default and can be
* changed by invoking {@link #replaceWith(String) replaceWith} method. The
* invoker of this decoder can choose one way by specifying a
* {@link CodingErrorAction CodingErrorAction} instance for each error type via
* {@link #onMalformedInput(CodingErrorAction) onMalformedInput} method and
* {@link #onUnmappableCharacter(CodingErrorAction) onUnmappableCharacter}
* method.
* </p>
* <p>
* This is an abstract class and encapsulates many common operations of the
* decoding process for all charsets. Decoders for a specific charset should
* extend this class and need only to implement the
* {@link #decodeLoop(ByteBuffer, CharBuffer) decodeLoop} method for the basic
* decoding. If a subclass maintains an internal state, it should override the
* {@link #implFlush(CharBuffer) implFlush} method and the
* {@link #implReset() implReset} method in addition.
* </p>
* <p>
* This class is not thread-safe.
* </p>
*
* @see java.nio.charset.Charset
* @see java.nio.charset.CharsetEncoder
* @since Android 1.0
*/
public abstract class CharsetDecoder {
/*
* --------------------------------------- Consts
* ---------------------------------------
*/
/*
* internal status consts
*/
private static final int INIT = 0;
private static final int ONGOING = 1;
private static final int END = 2;
private static final int FLUSH = 3;
/*
* --------------------------------------- Instance variables
* ---------------------------------------
*/
// average number of chars for one byte
private float averChars;
// maximum number of chars for one byte
private float maxChars;
// charset for this decoder
private Charset cs;
// specify the action if malformed input error encountered
private CodingErrorAction malformAction;
// specify the action if unmappable character error encountered
private CodingErrorAction unmapAction;
// the replacement string
private String replace;
// the current status
private int status;
/*
* --------------------------------------- Constructor
* ---------------------------------------
*/
/**
* Constructs a new <code>CharsetDecoder</code> using the given
* <code>Charset</code>, average number and maximum number of characters
* created by this decoder for one input byte, and the default replacement
* string "\uFFFD".
*
* @param charset
* the <code>Charset</code> to be used by this decoder.
* @param averageCharsPerByte
* the average number of characters created by this decoder for
* one input byte, must be positive.
* @param maxCharsPerByte
* the maximum number of characters created by this decoder for
* one input byte, must be positive.
* @throws IllegalArgumentException
* if <code>averageCharsPerByte</code> or
* <code>maxCharsPerByte</code> is negative.
* @since Android 1.0
*/
protected CharsetDecoder(Charset charset, float averageCharsPerByte,
float maxCharsPerByte) {
if (averageCharsPerByte <= 0 || maxCharsPerByte <= 0) {
// niochar.00=Characters number for one byte must be positive.
throw new IllegalArgumentException(Messages.getString("niochar.00")); //$NON-NLS-1$
}
if (averageCharsPerByte > maxCharsPerByte) {
// niochar.01=averageCharsPerByte is greater than maxCharsPerByte
throw new IllegalArgumentException(Messages.getString("niochar.01")); //$NON-NLS-1$
}
averChars = averageCharsPerByte;
maxChars = maxCharsPerByte;
cs = charset;
status = INIT;
malformAction = CodingErrorAction.REPORT;
unmapAction = CodingErrorAction.REPORT;
replace = "\ufffd"; //$NON-NLS-1$
}
/*
* --------------------------------------- Methods
* ---------------------------------------
*/
/**
* Gets the average number of characters created by this decoder for a
* single input byte.
*
* @return the average number of characters created by this decoder for a
* single input byte.
* @since Android 1.0
*/
public final float averageCharsPerByte() {
return averChars;
}
/**
* Gets the <code>Charset</code> which this decoder uses.
*
* @return the <code>Charset</code> which this decoder uses.
* @since Android 1.0
*/
public final Charset charset() {
return cs;
}
/**
* This is a facade method for the decoding operation.
* <p>
* This method decodes the remaining byte sequence of the given byte buffer
* into a new character buffer. This method performs a complete decoding
* operation, resets at first, then decodes, and flushes at last.
* </p>
* <p>
* This method should not be invoked while another {@code decode} operation
* is ongoing.
* </p>
*
* @param in
* the input buffer.
* @return a new <code>CharBuffer</code> containing the the characters
* produced by this decoding operation. The buffer's limit will be
* the position of the last character in the buffer, and the
* position will be zero.
* @throws IllegalStateException
* if another decoding operation is ongoing.
* @throws MalformedInputException
* if an illegal input byte sequence for this charset was
* encountered, and the action for malformed error is
* {@link CodingErrorAction#REPORT CodingErrorAction.REPORT}
* @throws UnmappableCharacterException
* if a legal but unmappable input byte sequence for this
* charset was encountered, and the action for unmappable
* character error is
* {@link CodingErrorAction#REPORT CodingErrorAction.REPORT}.
* Unmappable means the byte sequence at the input buffer's
* current position cannot be mapped to a Unicode character
* sequence.
* @throws CharacterCodingException
* if another exception happened during the decode operation.
* @since Android 1.0
*/
public final CharBuffer decode(ByteBuffer in)
throws CharacterCodingException {
reset();
int length = (int) (in.remaining() * averChars);
CharBuffer output = CharBuffer.allocate(length);
CoderResult result = null;
while (true) {
result = decode(in, output, false);
checkCoderResult(result);
if (result.isUnderflow()) {
break;
} else if (result.isOverflow()) {
output = allocateMore(output);
}
}
result = decode(in, output, true);
checkCoderResult(result);
while (true) {
result = flush(output);
checkCoderResult(result);
if (result.isOverflow()) {
output = allocateMore(output);
} else {
break;
}
}
output.flip();
status = FLUSH;
return output;
}
/*
* checks the result whether it needs to throw CharacterCodingException.
*/
private void checkCoderResult(CoderResult result)
throws CharacterCodingException {
if (result.isMalformed() && malformAction == CodingErrorAction.REPORT) {
throw new MalformedInputException(result.length());
} else if (result.isUnmappable()
&& unmapAction == CodingErrorAction.REPORT) {
throw new UnmappableCharacterException(result.length());
}
}
/*
* original output is full and doesn't have remaining. allocate more space
* to new CharBuffer and return it, the contents in the given buffer will be
* copied into the new buffer.
*/
private CharBuffer allocateMore(CharBuffer output) {
if (output.capacity() == 0) {
return CharBuffer.allocate(1);
}
CharBuffer result = CharBuffer.allocate(output.capacity() * 2);
output.flip();
result.put(output);
return result;
}
/**
* Decodes bytes starting at the current position of the given input buffer,
* and writes the equivalent character sequence into the given output buffer
* from its current position.
* <p>
* The buffers' position will be changed with the reading and writing
* operation, but their limits and marks will be kept intact.
* </p>
* <p>
* A <code>CoderResult</code> instance will be returned according to
* following rules:
* <ul>
* <li>{@link CoderResult#OVERFLOW CoderResult.OVERFLOW} indicates that
* even though not all of the input has been processed, the buffer the
* output is being written to has reached its capacity. In the event of this
* code being returned this method should be called once more with an
* <code>out</code> argument that has not already been filled.</li>
* <li>{@link CoderResult#UNDERFLOW CoderResult.UNDERFLOW} indicates that
* as many bytes as possible in the input buffer have been decoded. If there
* is no further input and no remaining bytes in the input buffer then this
* operation may be regarded as complete. Otherwise, this method should be
* called once more with additional input.</li>
* <li>A {@link CoderResult#malformedForLength(int) malformed input} result
* indicates that some malformed input error has been encountered, and the
* erroneous bytes start at the input buffer's position and their number can
* be got by result's {@link CoderResult#length() length}. This kind of
* result can be returned only if the malformed action is
* {@link CodingErrorAction#REPORT CodingErrorAction.REPORT}. </li>
* <li>A {@link CoderResult#unmappableForLength(int) unmappable character}
* result indicates that some unmappable character error has been
* encountered, and the erroneous bytes start at the input buffer's position
* and their number can be got by result's
* {@link CoderResult#length() length}. This kind of result can be returned
* only if the unmappable character action is
* {@link CodingErrorAction#REPORT CodingErrorAction.REPORT}. </li>
* </ul>
* </p>
* <p>
* The <code>endOfInput</code> parameter indicates that the invoker cannot
* provide further input. This parameter is true if and only if the bytes in
* current input buffer are all inputs for this decoding operation. Note
* that it is common and won't cause an error if the invoker sets false and
* then can't provide more input, while it may cause an error if the invoker
* always sets true in several consecutive invocations. This would make the
* remaining input to be treated as malformed input.
* </p>
* <p>
* This method invokes the
* {@link #decodeLoop(ByteBuffer, CharBuffer) decodeLoop} method to
* implement the basic decode logic for a specific charset.
* </p>
*
* @param in
* the input buffer.
* @param out
* the output buffer.
* @param endOfInput
* true if all the input characters have been provided.
* @return a <code>CoderResult</code> instance which indicates the reason
* of termination.
* @throws IllegalStateException
* if decoding has started or no more input is needed in this
* decoding progress.
* @throws CoderMalfunctionError
* if the {@link #decodeLoop(ByteBuffer, CharBuffer) decodeLoop}
* method threw an <code>BufferUnderflowException</code> or
* <code>BufferOverflowException</code>.
* @since Android 1.0
*/
public final CoderResult decode(ByteBuffer in, CharBuffer out,
boolean endOfInput) {
/*
* status check
*/
if ((status == FLUSH) || (!endOfInput && status == END)) {
throw new IllegalStateException();
}
CoderResult result = null;
// begin to decode
while (true) {
CodingErrorAction action = null;
try {
result = decodeLoop(in, out);
} catch (BufferOverflowException ex) {
// unexpected exception
throw new CoderMalfunctionError(ex);
} catch (BufferUnderflowException ex) {
// unexpected exception
throw new CoderMalfunctionError(ex);
}
/*
* result handling
*/
if (result.isUnderflow()) {
int remaining = in.remaining();
status = endOfInput ? END : ONGOING;
if (endOfInput && remaining > 0) {
result = CoderResult.malformedForLength(remaining);
in.position(in.position() + result.length());
} else {
return result;
}
}
if (result.isOverflow()) {
return result;
}
// set coding error handle action
action = malformAction;
if (result.isUnmappable()) {
action = unmapAction;
}
// If the action is IGNORE or REPLACE, we should continue decoding.
if (action == CodingErrorAction.REPLACE) {
if (out.remaining() < replace.length()) {
return CoderResult.OVERFLOW;
}
out.put(replace);
} else {
if (action != CodingErrorAction.IGNORE)
return result;
}
if (!result.isMalformed()) {
// Note: the following condition is removed in Harmony revision 518047
// However, making the conditional statement unconditional
// leads to misbehavior when using REPLACE on malformedInput.
in.position(in.position() + result.length());
}
}
}
/**
* Decodes bytes into characters. This method is called by the
* {@link #decode(ByteBuffer, CharBuffer, boolean) decode} method.
* <p>
* This method will implement the essential decoding operation, and it won't
* stop decoding until either all the input bytes are read, the output
* buffer is filled, or some exception is encountered. Then it will return a
* <code>CoderResult</code> object indicating the result of current
* decoding operation. The rules to construct the <code>CoderResult</code>
* are the same as for
* {@link #decode(ByteBuffer, CharBuffer, boolean) decode}. When an
* exception is encountered in the decoding operation, most implementations
* of this method will return a relevant result object to the
* {@link #decode(ByteBuffer, CharBuffer, boolean) decode} method, and some
* performance optimized implementation may handle the exception and
* implement the error action itself.
* </p>
* <p>
* The buffers are scanned from their current positions, and their positions
* will be modified accordingly, while their marks and limits will be
* intact. At most {@link ByteBuffer#remaining() in.remaining()} characters
* will be read, and {@link CharBuffer#remaining() out.remaining()} bytes
* will be written.
* </p>
* <p>
* Note that some implementations may pre-scan the input buffer and return a
* <code>CoderResult.UNDERFLOW</code> until it receives sufficient input.
* </p>
*
* @param in
* the input buffer.
* @param out
* the output buffer.
* @return a <code>CoderResult</code> instance indicating the result.
* @since Android 1.0
*/
protected abstract CoderResult decodeLoop(ByteBuffer in, CharBuffer out);
/**
* Gets the charset detected by this decoder; this method is optional.
* <p>
* If implementing an auto-detecting charset, then this decoder returns the
* detected charset from this method when it is available. The returned
* charset will be the same for the rest of the decode operation.
* </p>
* <p>
* If insufficient bytes have been read to determine the charset, an
* <code>IllegalStateException</code> will be thrown.
* </p>
* <p>
* The default implementation always throws
* <code>UnsupportedOperationException</code>, so it should be overridden
* by a subclass if needed.
* </p>
*
* @return the charset detected by this decoder, or null if it is not yet
* determined.
* @throws UnsupportedOperationException
* if this decoder does not implement an auto-detecting charset.
* @throws IllegalStateException
* if insufficient bytes have been read to determine the
* charset.
* @since Android 1.0
*/
public Charset detectedCharset() {
throw new UnsupportedOperationException();
}
/**
* Flushes this decoder.
*
* This method will call {@link #implFlush(CharBuffer) implFlush}. Some
* decoders may need to write some characters to the output buffer when they
* have read all input bytes; subclasses can override
* {@link #implFlush(CharBuffer) implFlush} to perform the writing operation.
* <p>
* The maximum number of written bytes won't be larger than
* {@link CharBuffer#remaining() out.remaining()}. If some decoder wants to
* write more bytes than an output buffer's remaining space allows, then a
* <code>CoderResult.OVERFLOW</code> will be returned, and this method
* must be called again with a character buffer that has more remaining
* space. Otherwise this method will return
* <code>CoderResult.UNDERFLOW</code>, which means one decoding process
* has been completed successfully.
* </p>
* <p>
* During the flush, the output buffer's position will be changed
* accordingly, while its mark and limit will be intact.
* </p>
* @param out
* the given output buffer.
* @return <code>CoderResult.UNDERFLOW</code> or
* <code>CoderResult.OVERFLOW</code>.
* @throws IllegalStateException
* if this decoder hasn't read all input bytes during one
* decoding process, which means neither after calling
* {@link #decode(ByteBuffer) decode(ByteBuffer)} nor after
* calling {@link #decode(ByteBuffer, CharBuffer, boolean)
* decode(ByteBuffer, CharBuffer, boolean)} with true as value
* for the last boolean parameter.
* @since Android 1.0
*/
public final CoderResult flush(CharBuffer out) {
if (status != END && status != INIT) {
throw new IllegalStateException();
}
CoderResult result = implFlush(out);
if (result == CoderResult.UNDERFLOW) {
status = FLUSH;
}
return result;
}
/**
* Flushes this decoder. The default implementation does nothing and always
* returns <code>CoderResult.UNDERFLOW</code>; this method can be
* overridden if needed.
*
* @param out
* the output buffer.
* @return <code>CoderResult.UNDERFLOW</code> or
* <code>CoderResult.OVERFLOW</code>.
* @since Android 1.0
*/
protected CoderResult implFlush(CharBuffer out) {
return CoderResult.UNDERFLOW;
}
/**
* Notifies that this decoder's <code>CodingErrorAction</code> specified
* for malformed input error has been changed. The default implementation
* does nothing; this method can be overridden if needed.
*
* @param newAction
* the new action.
* @since Android 1.0
*/
protected void implOnMalformedInput(CodingErrorAction newAction) {
// default implementation is empty
}
/**
* Notifies that this decoder's <code>CodingErrorAction</code> specified
* for unmappable character error has been changed. The default
* implementation does nothing; this method can be overridden if needed.
*
* @param newAction
* the new action.
* @since Android 1.0
*/
protected void implOnUnmappableCharacter(CodingErrorAction newAction) {
// default implementation is empty
}
/**
* Notifies that this decoder's replacement has been changed. The default
* implementation does nothing; this method can be overridden if needed.
*
* @param newReplacement
* the new replacement string.
* @since Android 1.0
*/
protected void implReplaceWith(String newReplacement) {
// default implementation is empty
}
/**
* Reset this decoder's charset related state. The default implementation
* does nothing; this method can be overridden if needed.
*
* @since Android 1.0
*/
protected void implReset() {
// default implementation is empty
}
/**
* Indicates whether this decoder implements an auto-detecting charset.
*
* @return <code>true</code> if this decoder implements an auto-detecting
* charset.
* @since Android 1.0
*/
public boolean isAutoDetecting() {
return false;
}
/**
* Indicates whether this decoder has detected a charset; this method is
* optional.
* <p>
* If this decoder implements an auto-detecting charset, then this method
* may start to return true during decoding operation to indicate that a
* charset has been detected in the input bytes and that the charset can be
* retrieved by invoking the {@link #detectedCharset() detectedCharset}
* method.
* </p>
* <p>
* Note that a decoder that implements an auto-detecting charset may still
* succeed in decoding a portion of the given input even when it is unable
* to detect the charset. For this reason users should be aware that a
* <code>false</code> return value does not indicate that no decoding took
* place.
* </p>
* <p>
* The default implementation always throws an
* <code>UnsupportedOperationException</code>; it should be overridden by
* a subclass if needed.
* </p>
*
* @return <code>true</code> if this decoder has detected a charset.
* @throws UnsupportedOperationException
* if this decoder doesn't implement an auto-detecting charset.
* @since Android 1.0
*/
public boolean isCharsetDetected() {
throw new UnsupportedOperationException();
}
/**
* Gets this decoder's <code>CodingErrorAction</code> when malformed input
* occurred during the decoding process.
*
* @return this decoder's <code>CodingErrorAction</code> when malformed
* input occurred during the decoding process.
* @since Android 1.0
*/
public CodingErrorAction malformedInputAction() {
return malformAction;
}
/**
* Gets the maximum number of characters which can be created by this
* decoder for one input byte, must be positive.
*
* @return the maximum number of characters which can be created by this
* decoder for one input byte, must be positive.
* @since Android 1.0
*/
public final float maxCharsPerByte() {
return maxChars;
}
/**
* Sets this decoder's action on malformed input errors.
*
* This method will call the
* {@link #implOnMalformedInput(CodingErrorAction) implOnMalformedInput}
* method with the given new action as argument.
*
* @param newAction
* the new action on malformed input error.
* @return this decoder.
* @throws IllegalArgumentException
* if {@code newAction} is {@code null}.
* @since Android 1.0
*/
public final CharsetDecoder onMalformedInput(CodingErrorAction newAction) {
if (null == newAction) {
throw new IllegalArgumentException();
}
malformAction = newAction;
implOnMalformedInput(newAction);
return this;
}
/**
* Sets this decoder's action on unmappable character errors.
*
* This method will call the
* {@link #implOnUnmappableCharacter(CodingErrorAction) implOnUnmappableCharacter}
* method with the given new action as argument.
*
* @param newAction
* the new action on unmappable character error.
* @return this decoder.
* @throws IllegalArgumentException
* if {@code newAction} is {@code null}.
* @since Android 1.0
*/
public final CharsetDecoder onUnmappableCharacter(
CodingErrorAction newAction) {
if (null == newAction) {
throw new IllegalArgumentException();
}
unmapAction = newAction;
implOnUnmappableCharacter(newAction);
return this;
}
/**
* Gets the replacement string, which is never null or empty.
*
* @return the replacement string, cannot be null or empty.
* @since Android 1.0
*/
public final String replacement() {
return replace;
}
/**
* Sets the new replacement string.
*
* This method first checks the given replacement's validity, then changes
* the replacement value, and at last calls the
* {@link #implReplaceWith(String) implReplaceWith} method with the given
* new replacement as argument.
*
* @param newReplacement
* the replacement string, cannot be null or empty. Its length
* cannot be larger than {@link #maxCharsPerByte()}.
* @return this decoder.
* @throws IllegalArgumentException
* if the given replacement cannot satisfy the requirement
* mentioned above.
* @since Android 1.0
*/
public final CharsetDecoder replaceWith(String newReplacement) {
if (null == newReplacement || newReplacement.length() == 0) {
// niochar.06=Replacement string cannot be null or empty.
throw new IllegalArgumentException(Messages.getString("niochar.06")); //$NON-NLS-1$
}
if (newReplacement.length() > maxChars) {
// niochar.07=Replacement string's length cannot be larger than max
// characters per byte.
throw new IllegalArgumentException(Messages.getString("niochar.07")); //$NON-NLS-1$
}
replace = newReplacement;
implReplaceWith(newReplacement);
return this;
}
/**
* Resets this decoder. This method will reset the internal status, and then
* calls <code>implReset()</code> to reset any status related to the
* specific charset.
*
* @return this decoder.
* @since Android 1.0
*/
public final CharsetDecoder reset() {
status = INIT;
implReset();
return this;
}
/**
* Gets this decoder's <code>CodingErrorAction</code> when an unmappable
* character error occurred during the decoding process.
*
* @return this decoder's <code>CodingErrorAction</code> when an
* unmappable character error occurred during the decoding process.
* @since Android 1.0
*/
public CodingErrorAction unmappableCharacterAction() {
return unmapAction;
}
}
|
