/*
* Copyright (C) 2012 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.media;
import java.nio.ByteBuffer;
import java.util.HashMap;
import java.util.Map;
/**
* Encapsulates the information describing the format of media data,
* be it audio or video.
*
* The format of the media data is specified as string/value pairs.
*
* Keys common to all audio/video formats, <b>all keys not marked optional are mandatory</b>:
*
* <table>
* <tr><th>Name</th><th>Value Type</th><th>Description</th></tr>
* <tr><td>{@link #KEY_MIME}</td><td>String</td><td>The type of the format.</td></tr>
* <tr><td>{@link #KEY_MAX_INPUT_SIZE}</td><td>Integer</td><td>optional, maximum size of a buffer of input data</td></tr>
* <tr><td>{@link #KEY_BIT_RATE}</td><td>Integer</td><td><b>encoder-only</b>, desired bitrate in bits/second</td></tr>
* </table>
*
* Video formats have the following keys:
* <table>
* <tr><th>Name</th><th>Value Type</th><th>Description</th></tr>
* <tr><td>{@link #KEY_WIDTH}</td><td>Integer</td><td></td></tr>
* <tr><td>{@link #KEY_HEIGHT}</td><td>Integer</td><td></td></tr>
* <tr><td>{@link #KEY_COLOR_FORMAT}</td><td>Integer</td><td>set by the user
* for encoders, readable in the output format of decoders</b></td></tr>
* <tr><td>{@link #KEY_FRAME_RATE}</td><td>Integer or Float</td><td><b>encoder-only</b></td></tr>
* <tr><td>{@link #KEY_CAPTURE_RATE}</td><td>Integer</td><td></td></tr>
* <tr><td>{@link #KEY_I_FRAME_INTERVAL}</td><td>Integer</td><td><b>encoder-only</b></td></tr>
* <tr><td>{@link #KEY_MAX_WIDTH}</td><td>Integer</td><td><b>decoder-only</b>, optional, max-resolution width</td></tr>
* <tr><td>{@link #KEY_MAX_HEIGHT}</td><td>Integer</td><td><b>decoder-only</b>, optional, max-resolution height</td></tr>
* <tr><td>{@link #KEY_REPEAT_PREVIOUS_FRAME_AFTER}</td><td>Long</td><td><b>video encoder in surface-mode only</b></td></tr>
* <tr><td>{@link #KEY_PUSH_BLANK_BUFFERS_ON_STOP}</td><td>Integer(1)</td><td><b>video decoder rendering to a surface only</b></td></tr>
* </table>
* Specify both {@link #KEY_MAX_WIDTH} and {@link #KEY_MAX_HEIGHT} to enable
* adaptive playback (seamless resolution change) for a video decoder that
* supports it ({@link MediaCodecInfo.CodecCapabilities#FEATURE_AdaptivePlayback}).
* The values are used as hints for the codec: they are the maximum expected
* resolution to prepare for. Depending on codec support, preparing for larger
* maximum resolution may require more memory even if that resolution is never
* reached. These fields have no effect for codecs that do not support adaptive
* playback.<br /><br />
*
* Audio formats have the following keys:
* <table>
* <tr><th>Name</th><th>Value Type</th><th>Description</th></tr>
* <tr><td>{@link #KEY_CHANNEL_COUNT}</td><td>Integer</td><td></td></tr>
* <tr><td>{@link #KEY_SAMPLE_RATE}</td><td>Integer</td><td></td></tr>
* <tr><td>{@link #KEY_IS_ADTS}</td><td>Integer</td><td>optional, if <em>decoding</em> AAC audio content, setting this key to 1 indicates that each audio frame is prefixed by the ADTS header.</td></tr>
* <tr><td>{@link #KEY_AAC_PROFILE}</td><td>Integer</td><td><b>encoder-only</b>, optional, if content is AAC audio, specifies the desired profile.</td></tr>
* <tr><td>{@link #KEY_AAC_SBR_MODE}</td><td>Integer</td><td><b>encoder-only</b>, optional, if content is AAC audio, specifies the desired SBR mode.</td></tr>
* <tr><td>{@link #KEY_AAC_DRC_TARGET_REFERENCE_LEVEL}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the target reference level.</td></tr>
* <tr><td>{@link #KEY_AAC_ENCODED_TARGET_LEVEL}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the target reference level used at encoder.</td></tr>
* <tr><td>{@link #KEY_AAC_DRC_BOOST_FACTOR}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the DRC boost factor.</td></tr>
* <tr><td>{@link #KEY_AAC_DRC_ATTENUATION_FACTOR}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the DRC attenuation factor.</td></tr>
* <tr><td>{@link #KEY_AAC_DRC_HEAVY_COMPRESSION}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies whether to use heavy compression.</td></tr>
* <tr><td>{@link #KEY_AAC_MAX_OUTPUT_CHANNEL_COUNT}</td><td>Integer</td><td><b>decoder-only</b>, optional, if content is AAC audio, specifies the maximum number of channels the decoder outputs.</td></tr>
* <tr><td>{@link #KEY_CHANNEL_MASK}</td><td>Integer</td><td>optional, a mask of audio channel assignments</td></tr>
* <tr><td>{@link #KEY_FLAC_COMPRESSION_LEVEL}</td><td>Integer</td><td><b>encoder-only</b>, optional, if content is FLAC audio, specifies the desired compression level.</td></tr>
* </table>
*
* Subtitle formats have the following keys:
* <table>
* <tr><td>{@link #KEY_MIME}</td><td>String</td><td>The type of the format.</td></tr>
* <tr><td>{@link #KEY_LANGUAGE}</td><td>String</td><td>The language of the content.</td></tr>
* </table>
*/
public final class MediaFormat {
public static final String MIMETYPE_VIDEO_VP8 = "video/x-vnd.on2.vp8";
public static final String MIMETYPE_VIDEO_VP9 = "video/x-vnd.on2.vp9";
public static final String MIMETYPE_VIDEO_AVC = "video/avc";
public static final String MIMETYPE_VIDEO_HEVC = "video/hevc";
public static final String MIMETYPE_VIDEO_MPEG4 = "video/mp4v-es";
public static final String MIMETYPE_VIDEO_H263 = "video/3gpp";
public static final String MIMETYPE_VIDEO_MPEG2 = "video/mpeg2";
public static final String MIMETYPE_VIDEO_RAW = "video/raw";
public static final String MIMETYPE_AUDIO_AMR_NB = "audio/3gpp";
public static final String MIMETYPE_AUDIO_AMR_WB = "audio/amr-wb";
public static final String MIMETYPE_AUDIO_MPEG = "audio/mpeg";
public static final String MIMETYPE_AUDIO_AAC = "audio/mp4a-latm";
public static final String MIMETYPE_AUDIO_QCELP = "audio/qcelp";
public static final String MIMETYPE_AUDIO_VORBIS = "audio/vorbis";
public static final String MIMETYPE_AUDIO_OPUS = "audio/opus";
public static final String MIMETYPE_AUDIO_G711_ALAW = "audio/g711-alaw";
public static final String MIMETYPE_AUDIO_G711_MLAW = "audio/g711-mlaw";
public static final String MIMETYPE_AUDIO_RAW = "audio/raw";
public static final String MIMETYPE_AUDIO_FLAC = "audio/flac";
public static final String MIMETYPE_AUDIO_MSGSM = "audio/gsm";
public static final String MIMETYPE_AUDIO_AC3 = "audio/ac3";
/**
* @hide
*/
public static final String MIMETYPE_AUDIO_EAC3 = "audio/eac3";
/**
* MIME type for WebVTT subtitle data.
*/
public static final String MIMETYPE_TEXT_VTT = "text/vtt";
/**
* MIME type for CEA-608 closed caption data.
*/
public static final String MIMETYPE_TEXT_CEA_608 = "text/cea-608";
private Map<String, Object> mMap;
/**
* A key describing the mime type of the MediaFormat.
* The associated value is a string.
*/
public static final String KEY_MIME = "mime";
/**
* A key describing the language of the content, using either ISO 639-1
* or 639-2/T codes. The associated value is a string.
*/
public static final String KEY_LANGUAGE = "language";
/**
* A key describing the sample rate of an audio format.
* The associated value is an integer
*/
public static final String KEY_SAMPLE_RATE = "sample-rate";
/**
* A key describing the number of channels in an audio format.
* The associated value is an integer
*/
public static final String KEY_CHANNEL_COUNT = "channel-count";
/**
* A key describing the width of the content in a video format.
* The associated value is an integer
*/
public static final String KEY_WIDTH = "width";
/**
* A key describing the height of the content in a video format.
* The associated value is an integer
*/
public static final String KEY_HEIGHT = "height";
/**
* A key describing the maximum expected width of the content in a video
* decoder format, in case there are resolution changes in the video content.
* The associated value is an integer
*/
public static final String KEY_MAX_WIDTH = "max-width";
/**
* A key describing the maximum expected height of the content in a video
* decoder format, in case there are resolution changes in the video content.
* The associated value is an integer
*/
public static final String KEY_MAX_HEIGHT = "max-height";
/** A key describing the maximum size in bytes of a buffer of data
* described by this MediaFormat.
* The associated value is an integer
*/
public static final String KEY_MAX_INPUT_SIZE = "max-input-size";
/**
* A key describing the bitrate in bits/sec.
* The associated value is an integer
*/
public static final String KEY_BIT_RATE = "bitrate";
/**
* A key describing the color format of the content in a video format.
* Constants are declared in {@link android.media.MediaCodecInfo.CodecCapabilities}.
*/
public static final String KEY_COLOR_FORMAT = "color-format";
/**
* A key describing the frame rate of a video format in frames/sec.
* The associated value is an integer or a float.
*/
public static final String KEY_FRAME_RATE = "frame-rate";
/**
* A key describing the capture rate of a video format in frames/sec.
* <p>
* When capture rate is different than the frame rate, it means that the
* video is acquired at a different rate than the playback, which produces
* slow motion or timelapse effect during playback. Application can use the
* value of this key to tell the relative speed ratio between capture and
* playback rates when the video was recorded.
* </p>
* <p>
* The associated value is an integer or a float.
* </p>
*/
public static final String KEY_CAPTURE_RATE = "capture-rate";
/**
* A key describing the frequency of I frames expressed in secs
* between I frames.
* The associated value is an integer.
*/
public static final String KEY_I_FRAME_INTERVAL = "i-frame-interval";
/**
* A key describing the temporal layering schema. This is an optional parameter
* that applies only to video encoders. Use {@link MediaCodec#getInputFormat}
* after {@link MediaCodec#configure configure} to query if the encoder supports
* the desired schema. Supported values are {@code webrtc.vp8.1-layer},
* {@code webrtc.vp8.2-layer}, {@code webrtc.vp8.3-layer}, and {@code none}.
* If the encoder does not support temporal layering, the input format will
* not have an entry with this key.
* The associated value is a string.
*/
public static final String KEY_TEMPORAL_LAYERING = "ts-schema";
/**
* @hide
*/
public static final String KEY_STRIDE = "stride";
/**
* @hide
*/
public static final String KEY_SLICE_HEIGHT = "slice-height";
/**
* Applies only when configuring a video encoder in "surface-input" mode.
* The associated value is a long and gives the time in microseconds
* after which the frame previously submitted to the encoder will be
* repeated (once) if no new frame became available since.
*/
public static final String KEY_REPEAT_PREVIOUS_FRAME_AFTER
= "repeat-previous-frame-after";
/**
* If specified when configuring a video decoder rendering to a surface,
* causes the decoder to output "blank", i.e. black frames to the surface
* when stopped to clear out any previously displayed contents.
* The associated value is an integer of value 1.
*/
public static final String KEY_PUSH_BLANK_BUFFERS_ON_STOP
= "push-blank-buffers-on-shutdown";
/**
* A key describing the duration (in microseconds) of the content.
* The associated value is a long.
*/
public static final String KEY_DURATION = "durationUs";
/**
* A key mapping to a value of 1 if the content is AAC audio and
* audio frames are prefixed with an ADTS header.
* The associated value is an integer (0 or 1).
* This key is only supported when _decoding_ content, it cannot
* be used to configure an encoder to emit ADTS output.
*/
public static final String KEY_IS_ADTS = "is-adts";
/**
* A key describing the channel composition of audio content. This mask
* is composed of bits drawn from channel mask definitions in {@link android.media.AudioFormat}.
* The associated value is an integer.
*/
public static final String KEY_CHANNEL_MASK = "channel-mask";
/**
* A key describing the AAC profile to be used (AAC audio formats only).
* Constants are declared in {@link android.media.MediaCodecInfo.CodecProfileLevel}.
*/
public static final String KEY_AAC_PROFILE = "aac-profile";
/**
* A key describing the AAC SBR mode to be used (AAC audio formats only).
* The associated value is an integer and can be set to following values:
* <ul>
* <li>0 - no SBR should be applied</li>
* <li>1 - single rate SBR</li>
* <li>2 - double rate SBR</li>
* </ul>
* Note: If this key is not defined the default SRB mode for the desired AAC profile will
* be used.
* <p>This key is only used during encoding.
*/
public static final String KEY_AAC_SBR_MODE = "aac-sbr-mode";
/**
* A key describing the maximum number of channels that can be output by the AAC decoder.
* By default, the decoder will output the same number of channels as present in the encoded
* stream, if supported. Set this value to limit the number of output channels, and use
* the downmix information in the stream, if available.
* <p>Values larger than the number of channels in the content to decode are ignored.
* <p>This key is only used during decoding.
*/
public static final String KEY_AAC_MAX_OUTPUT_CHANNEL_COUNT = "aac-max-output-channel_count";
/**
* A key describing a gain to be applied so that the output loudness matches the
* Target Reference Level. This is typically used to normalize loudness across program items.
* The gain is derived as the difference between the Target Reference Level and the
* Program Reference Level. The latter can be given in the bitstream and indicates the actual
* loudness value of the program item.
* <p>The value is given as an integer value between
* 0 and 127, and is calculated as -0.25 * Target Reference Level in dBFS.
* Therefore, it represents the range of Full Scale (0 dBFS) to -31.75 dBFS.
* <p>This key is only used during decoding.
*/
public static final String KEY_AAC_DRC_TARGET_REFERENCE_LEVEL = "aac-target-ref-level";
/**
* A key describing the target reference level that was assumed at the encoder for
* calculation of attenuation gains for clipping prevention. This information can be provided
* if it is known, otherwise a worst-case assumption is used.
* <p>The value is given as an integer value between
* 0 and 127, and is calculated as -0.25 * Target Reference Level in dBFS.
* Therefore, it represents the range of Full Scale (0 dBFS) to -31.75 dBFS.
* The default value is the worst-case assumption of 127.
* <p>The value is ignored when heavy compression is used (see
* {@link #KEY_AAC_DRC_HEAVY_COMPRESSION}).
* <p>This key is only used during decoding.
*/
public static final String KEY_AAC_ENCODED_TARGET_LEVEL = "aac-encoded-target-level";
/**
* A key describing the boost factor allowing to adapt the dynamics of the output to the
* actual listening requirements. This relies on DRC gain sequences that can be transmitted in
* the encoded bitstream to be able to reduce the dynamics of the output signal upon request.
* This factor enables the user to select how much of the gains are applied.
* <p>Positive gains (boost) and negative gains (attenuation, see
* {@link #KEY_AAC_DRC_ATTENUATION_FACTOR}) can be controlled separately for a better match
* to different use-cases.
* <p>Typically, attenuation gains are sent for loud signal segments, and boost gains are sent
* for soft signal segments. If the output is listened to in a noisy environment, for example,
* the boost factor is used to enable the positive gains, i.e. to amplify soft signal segments
* beyond the noise floor. But for listening late at night, the attenuation
* factor is used to enable the negative gains, to prevent loud signal from surprising
* the listener. In applications which generally need a low dynamic range, both the boost factor
* and the attenuation factor are used in order to enable all DRC gains.
* <p>In order to prevent clipping, it is also recommended to apply the attenuation factors
* in case of a downmix and/or loudness normalization to high target reference levels.
* <p>Both the boost and the attenuation factor parameters are given as integer values
* between 0 and 127, representing the range of the factor of 0 (i.e. don't apply)
* to 1 (i.e. fully apply boost/attenuation factors respectively).
* <p>This key is only used during decoding.
*/
public static final String KEY_AAC_DRC_BOOST_FACTOR = "aac-drc-boost-level";
/**
* A key describing the attenuation factor allowing to adapt the dynamics of the output to the
* actual listening requirements.
* See {@link #KEY_AAC_DRC_BOOST_FACTOR} for a description of the role of this attenuation
* factor and the value range.
* <p>This key is only used during decoding.
*/
public static final String KEY_AAC_DRC_ATTENUATION_FACTOR = "aac-drc-cut-level";
/**
* A key describing the selection of the heavy compression profile for DRC.
* Two separate DRC gain sequences can be transmitted in one bitstream: MPEG-4 DRC light
* compression, and DVB-specific heavy compression. When selecting the application of the heavy
* compression, one of the sequences is selected:
* <ul>
* <li>0 enables light compression,</li>
* <li>1 enables heavy compression instead.
* </ul>
* Note that only light compression offers the features of scaling of DRC gains
* (see {@link #KEY_AAC_DRC_BOOST_FACTOR} and {@link #KEY_AAC_DRC_ATTENUATION_FACTOR} for the
* boost and attenuation factors, and frequency-selective (multiband) DRC.
* Light compression usually contains clipping prevention for stereo downmixing while heavy
* compression, if additionally provided in the bitstream, is usually stronger, and contains
* clipping prevention for stereo and mono downmixing.
* <p>The default is light compression.
* <p>This key is only used during decoding.
*/
public static final String KEY_AAC_DRC_HEAVY_COMPRESSION = "aac-drc-heavy-compression";
/**
* A key describing the FLAC compression level to be used (FLAC audio format only).
* The associated value is an integer ranging from 0 (fastest, least compression)
* to 8 (slowest, most compression).
*/
public static final String KEY_FLAC_COMPRESSION_LEVEL = "flac-compression-level";
/**
* A key describing the encoding complexity.
* The associated value is an integer. These values are device and codec specific,
* but lower values generally result in faster and/or less power-hungry encoding.
*
* @see MediaCodecInfo.EncoderCapabilities#getComplexityRange()
*/
public static final String KEY_COMPLEXITY = "complexity";
/**
* A key describing the desired encoding quality.
* The associated value is an integer. This key is only supported for encoders
* that are configured in constant-quality mode. These values are device and
* codec specific, but lower values generally result in more efficient
* (smaller-sized) encoding.
*
* @hide
*
* @see MediaCodecInfo.EncoderCapabilities#getQualityRange()
*/
public static final String KEY_QUALITY = "quality";
/**
* A key describing the desired profile to be used by an encoder.
* Constants are declared in {@link MediaCodecInfo.CodecProfileLevel}.
* This key is only supported for codecs that specify a profile.
*
* @see MediaCodecInfo.CodecCapabilities#profileLevels
*/
public static final String KEY_PROFILE = "profile";
/**
* A key describing the desired bitrate mode to be used by an encoder.
* Constants are declared in {@link MediaCodecInfo.CodecCapabilities}.
*
* @see MediaCodecInfo.EncoderCapabilities#isBitrateModeSupported(int)
*/
public static final String KEY_BITRATE_MODE = "bitrate-mode";
/**
* A key describing the audio session ID of the AudioTrack associated
* to a tunneled video codec.
* The associated value is an integer.
*
* @see MediaCodecInfo.CodecCapabilities#FEATURE_TunneledPlayback
*/
public static final String KEY_AUDIO_SESSION_ID = "audio-session-id";
/**
* A key for boolean AUTOSELECT behavior for the track. Tracks with AUTOSELECT=true
* are considered when automatically selecting a track without specific user
* choice, based on the current locale.
* This is currently only used for subtitle tracks, when the user selected
* 'Default' for the captioning locale.
* The associated value is an integer, where non-0 means TRUE. This is an optional
* field; if not specified, AUTOSELECT defaults to TRUE.
*/
public static final String KEY_IS_AUTOSELECT = "is-autoselect";
/**
* A key for boolean DEFAULT behavior for the track. The track with DEFAULT=true is
* selected in the absence of a specific user choice.
* This is currently only used for subtitle tracks, when the user selected
* 'Default' for the captioning locale.
* The associated value is an integer, where non-0 means TRUE. This is an optional
* field; if not specified, DEFAULT is considered to be FALSE.
*/
public static final String KEY_IS_DEFAULT = "is-default";
/**
* A key for the FORCED field for subtitle tracks. True if it is a
* forced subtitle track. Forced subtitle tracks are essential for the
* content and are shown even when the user turns off Captions. They
* are used for example to translate foreign/alien dialogs or signs.
* The associated value is an integer, where non-0 means TRUE. This is an
* optional field; if not specified, FORCED defaults to FALSE.
*/
public static final String KEY_IS_FORCED_SUBTITLE = "is-forced-subtitle";
/** @hide */
public static final String KEY_IS_TIMED_TEXT = "is-timed-text";
/* package private */ MediaFormat(Map<String, Object> map) {
mMap = map;
}
/**
* Creates an empty MediaFormat
*/
public MediaFormat() {
mMap = new HashMap();
}
/* package private */ Map<String, Object> getMap() {
return mMap;
}
/**
* Returns true iff a key of the given name exists in the format.
*/
public final boolean containsKey(String name) {
return mMap.containsKey(name);
}
/**
* A key prefix used together with a {@link MediaCodecInfo.CodecCapabilities}
* feature name describing a required or optional feature for a codec capabilities
* query.
* The associated value is an integer, where non-0 value means the feature is
* requested to be present, while 0 value means the feature is requested to be not
* present.
* @see MediaCodecList#findDecoderForFormat
* @see MediaCodecList#findEncoderForFormat
* @see MediaCodecInfo.CodecCapabilities#isFormatSupported
*
* @hide
*/
public static final String KEY_FEATURE_ = "feature-";
/**
* Returns the value of an integer key.
*/
public final int getInteger(String name) {
return ((Integer)mMap.get(name)).intValue();
}
/**
* Returns the value of an integer key, or the default value if the
* key is missing or is for another type value.
* @hide
*/
public final int getInteger(String name, int defaultValue) {
try {
return getInteger(name);
}
catch (NullPointerException e) { /* no such field */ }
catch (ClassCastException e) { /* field of different type */ }
return defaultValue;
}
/**
* Returns the value of a long key.
*/
public final long getLong(String name) {
return ((Long)mMap.get(name)).longValue();
}
/**
* Returns the value of a float key.
*/
public final float getFloat(String name) {
return ((Float)mMap.get(name)).floatValue();
}
/**
* Returns the value of a string key.
*/
public final String getString(String name) {
return (String)mMap.get(name);
}
/**
* Returns the value of a ByteBuffer key.
*/
public final ByteBuffer getByteBuffer(String name) {
return (ByteBuffer)mMap.get(name);
}
/**
* Returns whether a feature is to be enabled ({@code true}) or disabled
* ({@code false}).
*
* @param feature the name of a {@link MediaCodecInfo.CodecCapabilities} feature.
*
* @throws IllegalArgumentException if the feature was neither set to be enabled
* nor to be disabled.
*/
public boolean getFeatureEnabled(String feature) {
Integer enabled = (Integer)mMap.get(KEY_FEATURE_ + feature);
if (enabled == null) {
throw new IllegalArgumentException("feature is not specified");
}
return enabled != 0;
}
/**
* Sets the value of an integer key.
*/
public final void setInteger(String name, int value) {
mMap.put(name, new Integer(value));
}
/**
* Sets the value of a long key.
*/
public final void setLong(String name, long value) {
mMap.put(name, new Long(value));
}
/**
* Sets the value of a float key.
*/
public final void setFloat(String name, float value) {
mMap.put(name, new Float(value));
}
/**
* Sets the value of a string key.
*/
public final void setString(String name, String value) {
mMap.put(name, value);
}
/**
* Sets the value of a ByteBuffer key.
*/
public final void setByteBuffer(String name, ByteBuffer bytes) {
mMap.put(name, bytes);
}
/**
* Sets whether a feature is to be enabled ({@code true}) or disabled
* ({@code false}).
*
* If {@code enabled} is {@code true}, the feature is requested to be present.
* Otherwise, the feature is requested to be not present.
*
* @param feature the name of a {@link MediaCodecInfo.CodecCapabilities} feature.
*
* @see MediaCodecList#findDecoderForFormat
* @see MediaCodecList#findEncoderForFormat
* @see MediaCodecInfo.CodecCapabilities#isFormatSupported
*/
public void setFeatureEnabled(String feature, boolean enabled) {
setInteger(KEY_FEATURE_ + feature, enabled ? 1 : 0);
}
/**
* Creates a minimal audio format.
* @param mime The mime type of the content.
* @param sampleRate The sampling rate of the content.
* @param channelCount The number of audio channels in the content.
*/
public static final MediaFormat createAudioFormat(
String mime,
int sampleRate,
int channelCount) {
MediaFormat format = new MediaFormat();
format.setString(KEY_MIME, mime);
format.setInteger(KEY_SAMPLE_RATE, sampleRate);
format.setInteger(KEY_CHANNEL_COUNT, channelCount);
return format;
}
/**
* Creates a minimal subtitle format.
* @param mime The mime type of the content.
* @param language The language of the content, using either ISO 639-1 or 639-2/T
* codes. Specify null or "und" if language information is only included
* in the content. (This will also work if there are multiple language
* tracks in the content.)
*/
public static final MediaFormat createSubtitleFormat(
String mime,
String language) {
MediaFormat format = new MediaFormat();
format.setString(KEY_MIME, mime);
format.setString(KEY_LANGUAGE, language);
return format;
}
/**
* Creates a minimal video format.
* @param mime The mime type of the content.
* @param width The width of the content (in pixels)
* @param height The height of the content (in pixels)
*/
public static final MediaFormat createVideoFormat(
String mime,
int width,
int height) {
MediaFormat format = new MediaFormat();
format.setString(KEY_MIME, mime);
format.setInteger(KEY_WIDTH, width);
format.setInteger(KEY_HEIGHT, height);
return format;
}
@Override
public String toString() {
return mMap.toString();
}
}
|
