/*
* @(#)BufferedInputStream.java 1.57 06/06/07
*
* Copyright 2006 Sun Microsystems, Inc. All rights reserved.
* SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
*/
package java.io;
import java.util.concurrent.atomic.AtomicReferenceFieldUpdater;
/**
* A <code>BufferedInputStream</code> adds
* functionality to another input stream-namely,
* the ability to buffer the input and to
* support the <code>mark</code> and <code>reset</code>
* methods. When the <code>BufferedInputStream</code>
* is created, an internal buffer array is
* created. As bytes from the stream are read
* or skipped, the internal buffer is refilled
* as necessary from the contained input stream,
* many bytes at a time. The <code>mark</code>
* operation remembers a point in the input
* stream and the <code>reset</code> operation
* causes all the bytes read since the most
* recent <code>mark</code> operation to be
* reread before new bytes are taken from
* the contained input stream.
*
* @author Arthur van Hoff
* @version 1.57, 06/07/06
* @since JDK1.0
*/
public
class BufferedInputStream extends FilterInputStream {
private static int defaultBufferSize = 8192;
/**
* The internal buffer array where the data is stored. When necessary,
* it may be replaced by another array of
* a different size.
*/
protected volatile byte buf[];
/**
* Atomic updater to provide compareAndSet for buf. This is
* necessary because closes can be asynchronous. We use nullness
* of buf[] as primary indicator that this stream is closed. (The
* "in" field is also nulled out on close.)
*/
private static final
AtomicReferenceFieldUpdater<BufferedInputStream, byte[]> bufUpdater =
AtomicReferenceFieldUpdater.newUpdater
(BufferedInputStream.class, byte[].class, "buf");
/**
* The index one greater than the index of the last valid byte in
* the buffer.
* This value is always
* in the range <code>0</code> through <code>buf.length</code>;
* elements <code>buf[0]</code> through <code>buf[count-1]
* </code>contain buffered input data obtained
* from the underlying input stream.
*/
protected int count;
/**
* The current position in the buffer. This is the index of the next
* character to be read from the <code>buf</code> array.
* <p>
* This value is always in the range <code>0</code>
* through <code>count</code>. If it is less
* than <code>count</code>, then <code>buf[pos]</code>
* is the next byte to be supplied as input;
* if it is equal to <code>count</code>, then
* the next <code>read</code> or <code>skip</code>
* operation will require more bytes to be
* read from the contained input stream.
*
* @see java.io.BufferedInputStream#buf
*/
protected int pos;
/**
* The value of the <code>pos</code> field at the time the last
* <code>mark</code> method was called.
* <p>
* This value is always
* in the range <code>-1</code> through <code>pos</code>.
* If there is no marked position in the input
* stream, this field is <code>-1</code>. If
* there is a marked position in the input
* stream, then <code>buf[markpos]</code>
* is the first byte to be supplied as input
* after a <code>reset</code> operation. If
* <code>markpos</code> is not <code>-1</code>,
* then all bytes from positions <code>buf[markpos]</code>
* through <code>buf[pos-1]</code> must remain
* in the buffer array (though they may be
* moved to another place in the buffer array,
* with suitable adjustments to the values
* of <code>count</code>, <code>pos</code>,
* and <code>markpos</code>); they may not
* be discarded unless and until the difference
* between <code>pos</code> and <code>markpos</code>
* exceeds <code>marklimit</code>.
*
* @see java.io.BufferedInputStream#mark(int)
* @see java.io.BufferedInputStream#pos
*/
protected int markpos = -1;
/**
* The maximum read ahead allowed after a call to the
* <code>mark</code> method before subsequent calls to the
* <code>reset</code> method fail.
* Whenever the difference between <code>pos</code>
* and <code>markpos</code> exceeds <code>marklimit</code>,
* then the mark may be dropped by setting
* <code>markpos</code> to <code>-1</code>.
*
* @see java.io.BufferedInputStream#mark(int)
* @see java.io.BufferedInputStream#reset()
*/
protected int marklimit;
/**
* Check to make sure that underlying input stream has not been
* nulled out due to close; if not return it;
*/
private InputStream getInIfOpen() throws IOException {
InputStream input = in;
if (input == null)
throw new IOException("Stream closed");
return input;
}
/**
* Check to make sure that buffer has not been nulled out due to
* close; if not return it;
*/
private byte[] getBufIfOpen() throws IOException {
byte[] buffer = buf;
if (buffer == null)
throw new IOException("Stream closed");
return buffer;
}
/**
* Creates a <code>BufferedInputStream</code>
* and saves its argument, the input stream
* <code>in</code>, for later use. An internal
* buffer array is created and stored in <code>buf</code>.
*
* @param in the underlying input stream.
*/
public BufferedInputStream(InputStream in) {
this(in, defaultBufferSize);
}
/**
* Creates a <code>BufferedInputStream</code>
* with the specified buffer size,
* and saves its argument, the input stream
* <code>in</code>, for later use. An internal
* buffer array of length <code>size</code>
* is created and stored in <code>buf</code>.
*
* @param in the underlying input stream.
* @param size the buffer size.
* @exception IllegalArgumentException if size <= 0.
*/
public BufferedInputStream(InputStream in, int size) {
super(in);
if (size <= 0) {
throw new IllegalArgumentException("Buffer size <= 0");
}
buf = new byte[size];
}
/**
* Fills the buffer with more data, taking into account
* shuffling and other tricks for dealing with marks.
* Assumes that it is being called by a synchronized method.
* This method also assumes that all data has already been read in,
* hence pos > count.
*/
private void fill() throws IOException {
byte[] buffer = getBufIfOpen();
if (markpos < 0)
pos = 0; /* no mark: throw away the buffer */
else if (pos >= buffer.length) /* no room left in buffer */
if (markpos > 0) { /* can throw away early part of the buffer */
int sz = pos - markpos;
System.arraycopy(buffer, markpos, buffer, 0, sz);
pos = sz;
markpos = 0;
} else if (buffer.length >= marklimit) {
markpos = -1; /* buffer got too big, invalidate mark */
pos = 0; /* drop buffer contents */
} else { /* grow buffer */
int nsz = pos * 2;
if (nsz > marklimit)
nsz = marklimit;
byte nbuf[] = new byte[nsz];
System.arraycopy(buffer, 0, nbuf, 0, pos);
if (!bufUpdater.compareAndSet(this, buffer, nbuf)) {
// Can't replace buf if there was an async close.
// Note: This would need to be changed if fill()
// is ever made accessible to multiple threads.
// But for now, the only way CAS can fail is via close.
// assert buf == null;
throw new IOException("Stream closed");
}
buffer = nbuf;
}
count = pos;
int n = getInIfOpen().read(buffer, pos, buffer.length - pos);
if (n > 0)
count = n + pos;
}
/**
* See
* the general contract of the <code>read</code>
* method of <code>InputStream</code>.
*
* @return the next byte of data, or <code>-1</code> if the end of the
* stream is reached.
* @exception IOException if this input stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
* @see java.io.FilterInputStream#in
*/
public synchronized int read() throws IOException {
if (pos >= count) {
fill();
if (pos >= count)
return -1;
}
return getBufIfOpen()[pos++] & 0xff;
}
/**
* Read characters into a portion of an array, reading from the underlying
* stream at most once if necessary.
*/
private int read1(byte[] b, int off, int len) throws IOException {
int avail = count - pos;
if (avail <= 0) {
/* If the requested length is at least as large as the buffer, and
if there is no mark/reset activity, do not bother to copy the
bytes into the local buffer. In this way buffered streams will
cascade harmlessly. */
if (len >= getBufIfOpen().length && markpos < 0) {
return getInIfOpen().read(b, off, len);
}
fill();
avail = count - pos;
if (avail <= 0) return -1;
}
int cnt = (avail < len) ? avail : len;
System.arraycopy(getBufIfOpen(), pos, b, off, cnt);
pos += cnt;
return cnt;
}
/**
* Reads bytes from this byte-input stream into the specified byte array,
* starting at the given offset.
*
* <p> This method implements the general contract of the corresponding
* <code>{@link InputStream#read(byte[], int, int) read}</code> method of
* the <code>{@link InputStream}</code> class. As an additional
* convenience, it attempts to read as many bytes as possible by repeatedly
* invoking the <code>read</code> method of the underlying stream. This
* iterated <code>read</code> continues until one of the following
* conditions becomes true: <ul>
*
* <li> The specified number of bytes have been read,
*
* <li> The <code>read</code> method of the underlying stream returns
* <code>-1</code>, indicating end-of-file, or
*
* <li> The <code>available</code> method of the underlying stream
* returns zero, indicating that further input requests would block.
*
* </ul> If the first <code>read</code> on the underlying stream returns
* <code>-1</code> to indicate end-of-file then this method returns
* <code>-1</code>. Otherwise this method returns the number of bytes
* actually read.
*
* <p> Subclasses of this class are encouraged, but not required, to
* attempt to read as many bytes as possible in the same fashion.
*
* @param b destination buffer.
* @param off offset at which to start storing bytes.
* @param len maximum number of bytes to read.
* @return the number of bytes read, or <code>-1</code> if the end of
* the stream has been reached.
* @exception IOException if this input stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
*/
public synchronized int read(byte b[], int off, int len)
throws IOException
{
getBufIfOpen(); // Check for closed stream
if ((off | len | (off + len) | (b.length - (off + len))) < 0) {
throw new IndexOutOfBoundsException();
} else if (len == 0) {
return 0;
}
int n = 0;
for (;;) {
int nread = read1(b, off + n, len - n);
if (nread <= 0)
return (n == 0) ? nread : n;
n += nread;
if (n >= len)
return n;
// if not closed but no bytes available, return
InputStream input = in;
if (input != null && input.available() <= 0)
return n;
}
}
/**
* See the general contract of the <code>skip</code>
* method of <code>InputStream</code>.
*
* @exception IOException if the stream does not support seek,
* or if this input stream has been closed by
* invoking its {@link #close()} method, or an
* I/O error occurs.
*/
public synchronized long skip(long n) throws IOException {
getBufIfOpen(); // Check for closed stream
if (n <= 0) {
return 0;
}
long avail = count - pos;
if (avail <= 0) {
// If no mark position set then don't keep in buffer
if (markpos <0)
return getInIfOpen().skip(n);
// Fill in buffer to save bytes for reset
fill();
avail = count - pos;
if (avail <= 0)
return 0;
}
long skipped = (avail < n) ? avail : n;
pos += skipped;
return skipped;
}
/**
* Returns an estimate of the number of bytes that can be read (or
* skipped over) from this input stream without blocking by the next
* invocation of a method for this input stream. The next invocation might be
* the same thread or another thread. A single read or skip of this
* many bytes will not block, but may read or skip fewer bytes.
* <p>
* This method returns the sum of the number of bytes remaining to be read in
* the buffer (<code>count - pos</code>) and the result of calling the
* {@link java.io.FilterInputStream#in in}.available().
*
* @return an estimate of the number of bytes that can be read (or skipped
* over) from this input stream without blocking.
* @exception IOException if this input stream has been closed by
* invoking its {@link #close()} method,
* or an I/O error occurs.
*/
public synchronized int available() throws IOException {
return getInIfOpen().available() + (count - pos);
}
/**
* See the general contract of the <code>mark</code>
* method of <code>InputStream</code>.
*
* @param readlimit the maximum limit of bytes that can be read before
* the mark position becomes invalid.
* @see java.io.BufferedInputStream#reset()
*/
public synchronized void mark(int readlimit) {
marklimit = readlimit;
markpos = pos;
}
/**
* See the general contract of the <code>reset</code>
* method of <code>InputStream</code>.
* <p>
* If <code>markpos</code> is <code>-1</code>
* (no mark has been set or the mark has been
* invalidated), an <code>IOException</code>
* is thrown. Otherwise, <code>pos</code> is
* set equal to <code>markpos</code>.
*
* @exception IOException if this stream has not been marked or,
* if the mark has been invalidated, or the stream
* has been closed by invoking its {@link #close()}
* method, or an I/O error occurs.
* @see java.io.BufferedInputStream#mark(int)
*/
public synchronized void reset() throws IOException {
getBufIfOpen(); // Cause exception if closed
if (markpos < 0)
throw new IOException("Resetting to invalid mark");
pos = markpos;
}
/**
* Tests if this input stream supports the <code>mark</code>
* and <code>reset</code> methods. The <code>markSupported</code>
* method of <code>BufferedInputStream</code> returns
* <code>true</code>.
*
* @return a <code>boolean</code> indicating if this stream type supports
* the <code>mark</code> and <code>reset</code> methods.
* @see java.io.InputStream#mark(int)
* @see java.io.InputStream#reset()
*/
public boolean markSupported() {
return true;
}
/**
* Closes this input stream and releases any system resources
* associated with the stream.
* Once the stream has been closed, further read(), available(), reset(),
* or skip() invocations will throw an IOException.
* Closing a previously closed stream has no effect.
*
* @exception IOException if an I/O error occurs.
*/
public void close() throws IOException {
byte[] buffer;
while ( (buffer = buf) != null) {
if (bufUpdater.compareAndSet(this, buffer, null)) {
InputStream input = in;
in = null;
if (input != null)
input.close();
return;
}
// Else retry in case a new buf was CASed in fill()
}
}
}
|
