/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright 1997-2007 Sun Microsystems, Inc. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can obtain
* a copy of the License at https://glassfish.dev.java.net/public/CDDL+GPL.html
* or glassfish/bootstrap/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at glassfish/bootstrap/legal/LICENSE.txt.
* Sun designates this particular file as subject to the "Classpath" exception
* as provided by Sun in the GPL Version 2 section of the License file that
* accompanied this code. If applicable, add the following below the License
* Header, with the fields enclosed by brackets [] replaced by your own
* identifying information: "Portions Copyrighted [year]
* [name of copyright owner]"
*
* Contributor(s):
*
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*/
/*
* Copyright 2004-2005 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
package com.sun.jts.utils.RecoveryHooks;
import java.text.MessageFormat;
import java.util.Hashtable;
import java.util.ResourceBundle;
import com.sun.jts.jtsxa.Utility;
import com.sun.jts.otsidl.JCoordinator;
import com.sun.jts.otsidl.JCoordinatorHelper;
import com.sun.jts.CosTransactions.GlobalTID;
import org.omg.CosTransactions.Coordinator;
import java.util.logging.Logger;
import java.util.logging.Level;
import com.sun.logging.LogDomains;
import com.sun.jts.utils.LogFormatter;
/**
* This class defines API's for the test harness to induce
* recovery by setting crash points (in the case of TM crashes)
* and wait points (in the case of RM crashes).
*
* In order to induce TM crashes, the test harness sets the failure points
* by calling setCrashPoint(), after transaction.begin() from each thread.
* Thus, multiple threads involving different transactions can
* set different points of failure, which will cause the TM to wait
* at the failure points, until crash() method is invoked.
* Note: Only those transactions calling setCrashPoint() will be affected.
*
* The crash() method needs to be invoked from a seperate
* thread. The TM would increment TestRecovery.waitCount field to
* indicate the total number of failure points reached.
* When the waitCount reaches the expected value
* (obtained through getWaitCount()), the test harness shall call crash().
*
* In order to test RM recovery, the
* test harness sets the failure points by calling setWaitPoint(),
* after transaction.begin() from each thread. The TM waits at predefined
* failure points for the stipulated time duration, during which the RM is
* expected to crash; after which the TM will proceed with regular
* completion (a human is expected to crash the RM manually during the
* wait duration). As in the TM recovery case, the waitCount will be
* incremented to indicate the total number of failure points reached.
*
* If the RM does not crash during the stipulated time
* duration, the TM will proceed with normal completion for the specific
* transaction. It does not matter if the RM
* comes back alive, since the TM would anyway retry completion.
* Note: Only those transactions calling setWaitPoint() will be affected.
*
* @author Ram Jeyaraman 04/21/1999
*/
public class FailureInducer {
// static finals
public static final Integer ACTIVE = new Integer(0);
public static final Integer PREPARING = new Integer(1);
public static final Integer PREPARED = new Integer(2);
public static final Integer COMPLETING = new Integer(3);
public static final Integer COMPLETED = new Integer(4);
// static fields
private static boolean failureInducerIsActive = false;
private static boolean crash = false;
private static int waitPeriod = 0;
private static int waitCount = 0;
private static Hashtable crashList = new Hashtable();
private static Hashtable waitList = new Hashtable();
private static Hashtable waitTime = new Hashtable();
private static ResourceBundle messages = ResourceBundle.
getBundle("com.sun.jts.utils.RecoveryHooks.Messages"/*#Frozen*/);
/*
Logger to log transaction messages
*/
static Logger _logger = LogDomains.getLogger(LogDomains.TRANSACTION_LOGGER);
// static initializer
static {
}
// static methods
/**
* This activates the FailureInducer. An application needs to activate
* the failure inducer first, before setting the fail or wait points.
*/
public static void activateFailureInducer() {
failureInducerIsActive = true;
}
/**
* This deactivates the FailureInducer. An application deactivate the
* failure inducer, to temporarily stop failure inducement. The fail
* or wait points are not forgotten during the dormant state.
*/
public static void deactivateFailureInducer() {
failureInducerIsActive = false;
}
/**
* @return the current state (active or inactive) of failure inducer.
*/
public static boolean isFailureInducerActive() {
return failureInducerIsActive;
}
/**
* Setting a crash point will cause the TM to wait at the
* failure point, until crash() is called.
*
* @param crashPoint pre-defined failure points
* (PREPARING, PREPARED, COMMITTING, COMMITTED).
*/
public static void setCrashPoint(Integer crashPoint) {
// sanity check
if (crashPoint == null) {
_logger.log(Level.SEVERE,"jts.invalid_crash_point");
return;
}
Coordinator coord = Utility.getCoordinator(Utility.getControl());
JCoordinator jcoord = JCoordinatorHelper.narrow(coord);
if (jcoord != null) {
GlobalTID gtid = new GlobalTID(jcoord.getGlobalTID());
crashList.put(gtid, crashPoint);
}
}
/**
* Setting a wait point will cause the TM to wait at the
* failure point, for the stipulated wait duration.
*
* @param crashPoint pre-defined failure points
* (PREPARING, PREPARED, COMMITTING, COMMITTED).
* @param waitDuration time duration (seconds) for RM failure to happen.
*/
public static void setWaitPoint(Integer waitPoint, int waitDuration) {
// sanity check
if (waitPoint == null) {
_logger.log(Level.SEVERE,"jts.invalid_wait_point");
return;
}
Coordinator coord = Utility.getCoordinator(Utility.getControl());
JCoordinator jcoord = JCoordinatorHelper.narrow(coord);
if (jcoord != null) {
GlobalTID gtid = new GlobalTID(jcoord.getGlobalTID());
waitList.put(gtid, waitPoint);
waitTime.put(gtid, new Integer(waitDuration));
}
}
/**
* Forces the TM to crash.
*/
public static void crash() {
crash = true;
}
/**
* Increments the wait count (called only by TM).
*/
private static void incrementWaitCount() {
waitCount++;
}
/**
* @return the total number of failure points reached.
*/
public static int getWaitCount() {
return waitCount;
}
/**
* This method is called by the coordinator at every valid
* failure point. If the crash point or the wait point set for
* the current transaction matches the current failure point,
* an appropriate action (crash or wait) is taken.
* <em>Note:</em> Crash action takes precedence over wait actions for the
* same failure point.
*
* @param coord the coordinator object (which represents the transaction.
* @param failPoint indicates the current failure point in coordinator code.
*/
public static void waitForFailure(GlobalTID gtid, Integer failPoint) {
// sanity check
if (gtid == null)
return;
Integer crashPoint = (Integer) crashList.get(gtid);
Integer waitPoint = (Integer) waitList.get(gtid);
// no crash point or wait point has been set for the transaction
if (crashPoint == null && waitPoint == null) {
return;
}
_logger.log(Level.WARNING,"jts.failpoint",failPoint);
// increment wait count and wait for the crash flag to be set
if (crashPoint != null && crashPoint.equals(failPoint)) {
incrementWaitCount();
while (crash == false) {
try {
Thread.sleep(3000);
} catch (Exception e) {}
}
System.exit(0);
}
// wait for the wait duration and continue
if (waitPoint != null && waitPoint.equals(failPoint)) {
Integer waitDuration = (Integer) waitTime.get(gtid);
// wait duration has not be set or is invalid
if (waitDuration == null || waitDuration.intValue() < 0)
return;
// wait for the stipulated duration
try {
Thread.sleep(waitDuration.intValue() * 1000);
} catch (Exception e) {}
}
}
// Utility methods for fetching i18n/l10n messages
private static String getMessage(String key) {
return getMessage(key, null);
}
private static String getMessage(String key, Object[] inserts) {
if (messages == null || key == null) {
return null;
}
String msg = messages.getString(key);
if (msg == null) {
return null;
}
if (inserts == null) {
return msg;
} else {
return MessageFormat.format(msg, inserts);
}
}
}
|
